AM79C978VCSLASHW datasheet(151/261 Pages) AMD

151 / 261 page

Am79C978

151

physical, logical filtering, broad-

cast, and promiscuous.

This bit is always read/write ac-

cessible. RCVME is cleared by

H_RESET and is not affected by

S_RESET or setting the STOP

bit.

XMTE

Transmit Status Enable. When

this bit is set, a value of 1 is

passed to the LEDOUT bit in this

activity on the network.

This bit is always read/write ac-

cessible. XMTE is cleared by

H_RESET and is not affected by

S_RESET or setting the STOP

bit.

POWER

Power. When this bit is set to 1,

the device is operating in HIGH

power mode.

RCVE

Receive Status Enable. When

this bit is set, a value of 1 is

passed to the LEDOUT bit in this

tivity on the network.

This bit is always read/write ac-

cessible. RCVE is set to 1 by

H_RESET and is not affected by

S_RESET or setting the STOP

bit.

SPEED

Speed. When this bit is set to 1,

the device is operating in HIGH

speed mode.

COLE

Collision Status Enable. When

this bit is set, a value of 1 is

passed to the LEDOUT bit in this

activity on the network.

This bit is always read/write ac-

cessible. COLE is cleared by

H_RESET and is not affected by

S_RESET or setting the STOP

bit.

BCR6: LED2 Status

BCR6 controls the function(s) that the LED2 pin dis-

plays. Multiple functions can be simultaneously enabled

on this LED pin. The LED display will indicate the logical

OR of the enabled functions.

Note: When LEDPE (BCR2, bit 12) is set to 1, pro-

gramming of the LED2 Status register is enabled.

When LEDPE is cleared to 0, programming of the

LED2 register is disabled. Writes to those registers will

be ignored.

Note: Bits 15-0 in this register are programmable

through the EEPROM PREAD operation.

Bit

Name

Description

31-16 RES

Reserved locations. Written as

zeros and read as undefined.

LEDOUT

This bit indicates the current

(non-stretched) value of the LED

output pin. A value of 1 in this bit

indicates that the OR of the en-

abled signals is true.

The logical value of the LEDOUT

status signal is determined by the

settings of the individual Status

Enable bits of the LED register

(bits 8 and 6-0).

This bit is read accessible al-

ways. This bit is read only; writes

have no effect. LEDOUT is unaf-

fected by H_RESET, S_RESET,

or STOP.

LEDPOL

LED Polarity. When this bit has

the value 0, then the LED pin will

be driven to a LOW level whenev-

er the OR of the enabled signals

is true, and the LED pin will be

disabled and allowed to float high

whenever the OR of the enabled

signals is false (i.e., the LED out-

put will be an Open Drain output

and the output value will be the

inverse of the LEDOUT status

bit).

When this bit has the value 1,

then the LED pin will be driven to

a HIGH level whenever the OR of

the enabled signals is true, and

the LED pin will be driven to a

LOW level whenever the OR of

the enabled signals is false (i.e.,

the LED output will be a Totem

Pole output and the output value

will be the same polarity as the

LEDOUT status bit).

The setting of this bit will not ef-

fect the polarity of the LEDOUT

bit for this register.

AM79C978VC/W 数据表(PDF) 151 Page - Advanced Micro Devices

AM79C978VC/W 数据表(HTML) 151 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

AM79C978VC/W 数据表(PDF) 151 Page - Advanced Micro Devices

AM79C978VC/W 数据表(HTML) 151 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载