AM79C978VCSLASHW datasheet(152/261 Pages) AMD

152 / 261 page

152

Am79C978

This bit is always read/write ac-

cessible. LEDPOL is cleared by

H_RESET and is not affected by

S_RESET or setting the STOP

bit.

LEDDIS

LED Disable. This bit is used to

disable the LED output. When

LEDDIS has the value 1, then the

LED output will always be dis-

abled. When LEDDIS has the val-

ue 0, then the LED output value

will be governed by the LEDOUT

and LEDPOL values.

This bit is always read/write ac-

cessible. LEDDIS is cleared by

H_RESET and is not affected by

S_RESET or setting the STOP

bit.

100E

100 Mbps Enable. When this bit

is set to 1, a value of 1 is passed

to the LEDOUT bit in this register

when the Am79C978 controller is

operating at 100 Mbps mode.

This bit is always read/write ac-

cessible. 100E is cleared by

H_RESET and is not affected by

S_RESET or setting the STOP

bit.

11-10 RES

Reserved locations. Written and

read as zeros.

MPSE

Magic Packet Status Enable.

When this bit is set to 1, a value of

1 is passed to the LEDOUT bit in

this register when Magic Packet

frame mode is enabled and a

Magic Packet frame is detected

on the network.

This bit is always read/write ac-

cessible. MPSE is cleared by

H_RESET and is not affected by

S_RESET or setting the STOP

bit.

FDLSE

Full-Duplex Link Status Enable.

Indicates the Full-Duplex Link

Test Status. When this bit is set,

a value of 1 is passed to the LED-

OUT signal when the Am79C978

controller is functioning in a Link

Pass state and full-duplex opera-

tion

enabled.

When

the

Am79C978 controller is not func-

tioning in a Link Pass state with

full-duplex operation being en-

abled, a value of 0 is passed to

the LEDOUT signal.

This bit is always read/write ac-

cessible. FDLSE is cleared by

H_RESET and is not affected by

S_RESET or setting the STOP

bit.

PSE

Pulse Stretcher Enable. When

this bit is set, the LED illumination

time is extended for each new oc-

currence of the enabled function

for this LED output. A value of 0

disables the pulse stretcher.

This bit is always read/write ac-

cessible. PSE is set to 1 by

H_RESET and is not affected by

S_RESET or setting the STOP

bit.

LNKSE

Link Status Enable. When this bit

is set, a value of 1 will be passed

to the LEDOUT bit in this register

in Link Pass state.

This bit is always read/write ac-

cessible. LNKSE is cleared by

H_RESET and is not affected by

S_RESET or setting the STOP

bit.

RCVME

Receive Match Status Enable.

When this bit is set, a value of 1 is

passed to the LEDOUT bit in this

tivity on the network that has

passed the address match func-

tion for this node. All address

matching modes are included:

physical, logical filtering, broad-

cast, and promiscuous.

This bit is always read/write ac-

cessible. RCVME is cleared by

H_RESET and is not affected by

S_RESET or setting the STOP

bit.

XMTE

Transmit Status Enable. When

this bit is set, a value of 1 is

passed to the LEDOUT bit in this

activity on the network.

AM79C978VC/W 数据表(PDF) 152 Page - Advanced Micro Devices

AM79C978VC/W 数据表(HTML) 152 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

AM79C978VC/W 数据表(PDF) 152 Page - Advanced Micro Devices

AM79C978VC/W 数据表(HTML) 152 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载