SPC58EG80C3 datasheet(17/139 Pages) STMICROELECTRONICS

17 / 139 page

DS11758 Rev 6

17/139

SPC584Gx, SPC58EGx, SPC58NGx

Electrical characteristics

IINJ

Maximum DC

injection current

for each

analog/digital

PAD(7)

—–5

—

TSTG

Maximum non-

operating

Storage

temperature

range

—

–55

—

125

°C

TPAS

Maximum

nonoperating

temperature

during passive

lifetime

—–55

—

150(8)

°C

TSTORAGE

—

Maximum

storage time,

assembled part

programmed in

ECU

No supply; storage

temperature in

range –40 °C to

60 °C

—

years

TSDR

Maximum solder

temperature Pb-

free packaged(9)

——

—

260

°C

MSL

Moisture

sensitivity

level(10)

——

—

TXRAY dose

Maximum

cumulated

XRAY dose

Typical range for

X-rays source

during

inspection:80 ÷

130 KV; 20 ÷

μA

——

grey

1. VDD_LV: allowed 1.335 V - 1.400 V for 60 seconds cumulative time at the given temperature profile. Remaining time allowed

1.260 V - 1.335 V for 10 hours cumulative time at the given temperature profile. Remaining time as defined in Section 4.3:

Operating conditions.

2. VDD_LV_BD: allowed 1.450 V - 1.500 V for 60 seconds cumulative time at the given temperature profile. Remaining time

allowed 1.375 V - 1.450 V for 10 hours cumulative time at maximum TJ = 125 °C. Remaining time as defined in Section 4.3:

Operating conditions.

3. VDD_HV: allowed 5.5 V – 6.0 V for 60 seconds cumulative time at the given temperature profile, for 10 hours cumulative

time with the device in reset at the given temperature profile. Remaining time as defined in Section 4.3: Operating

conditions.

4. The maximum input voltage on an I/O pin tracks with the associated I/O supply maximum. For the injection current

condition on a pin, the voltage will be equal to the supply plus the voltage drop across the internal ESD diode from I/O pin

to supply. The diode voltage varies greatly across process and temperature, but a value of 0.3 V can be used for nominal

calculations.

5. Relative value can be exceeded if design measures are taken to ensure injection current limitation (parameter IINJ).

Table 4. Absolute maximum ratings (continued)

Symbol

Parameter

Conditions

Value

Unit

Min

Typ

Max

SPC58EG80C3 数据表(PDF) 17 Page - STMicroelectronics

SPC58EG80C3 数据表(HTML) 17 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

SPC58EG80C3 数据表(PDF) 17 Page - STMicroelectronics

SPC58EG80C3 数据表(HTML) 17 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载