ST92F120JR9T datasheet(157/320 Pages) STMICROELECTRONICS

157 / 320 page

157/320

EXTENDED FUNCTION TIMER (EFT)

EXTENDED FUNCTION TIMER (Cont’d)

STATUS REGISTER (SR)

R254 - Read Only

Reset Value: 0000 0000 (00h)

The three least significant bits are not used.

Bit 7 = ICF1

Input Capture Flag 1.

0: No input capture (reset value).

1: An input capture has occurred. To clear this bit,

first read the SR register, then read or write the

low byte of the IC1R (IC1LR) register.

Bit 6 = OCF1

Output Compare Flag 1.

0: No match (reset value).

1: The content of the free running counter has

matched the content of the OC1R register. To

clear this bit, first read the SR register, then read

or write the low byte of the OC1R (OC1LR) reg-

ister.

Bit 5 = TOF

Timer Overflow.

0: No timer overflow (reset value).

1: The free running counter rolled over from FFFFh

to 0000h. To clear this bit, first read the SR reg-

ister, then read or write the low byte of the CR

(CLR) register.

Note: Reading or writing the ACLR register does

not clear TOF.

Bit 4 = ICF2

Input Capture Flag 2.

0: No input capture (reset value).

1: An input capture has occurred. To clear this bit,

first read the SR register, then read or write the

low byte of the IC2R (IC2LR) register.

Bit 3 = OCF2

Output Compare Flag 2.

0: No match (reset value).

1: The content of the free running counter has

matched the content of the OC2R register. To

clear this bit, first read the SR register, then read

or write the low byte of the OC2R (OC2LR) reg-

ister.

Bit 2-0 = Reserved, forced by hardware to 0.

CONTROL REGISTER 3 (CR3)

R255 - Read/Write

Reset Value: 0000 0000 (00h)

Bit 7-4 = Unused

Read as 0.

Bit 3 = TOIS

Timer Overflow Interrupt Selection.

0: Select External interrupt.

1: Select Timer Overflow Interrupt.

Bit 2 = OCIS

Output Compare Interrupt Selection.

0: Select External interrupt.

1: Select Timer Output Compare Interrupt.

Bit 1 = ICIS

Input Capture Interrupt Selection.

0: Select External interrupt.

1: Select Timer Input Capture Interrupt.

Bit 0 = EFTIS

Global Timer Interrupt Selection.

0: Select External interrupt.

1: Select Global Timer Interrupt.

ICF1

OCF1

TOF

ICF2

OCF2

TOIS

OCIS

ICIS

EFTIS

ST92F120JR9T 数据表(PDF) 157 Page - STMicroelectronics

ST92F120JR9T 数据表(HTML) 157 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

ST92F120JR9T 数据表(PDF) 157 Page - STMicroelectronics

ST92F120JR9T 数据表(HTML) 157 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载