MC68HC705P9CS datasheet(48/160 Pages) FREESCALE

48 / 160 page

Central Processor Unit (CPU)

Technical Data

MC68HC705P9 — Rev. 4.0

Central Processor Unit (CPU)

MOTOROLA

4.6.4 Program Counter

The program counter is a 16-bit register that contains the address of the

next instruction or operand to be fetched. The three most significant bits

of the program counter are ignored internally and appear as 000.

Normally, the address in the program counter automatically increments

to the next sequential memory location every time an instruction or

operand is fetched. Jump, branch, and interrupt operations load the

program counter with an address other than that of the next sequential

location.

4.6.5 Condition Code Register

The condition code register is an 8-bit register whose three most

significant bits are permanently fixed at 111. The condition code register

contains the interrupt mask and four flags that indicate the results of the

instruction just executed.

H — Half-Carry Flag

The CPU sets the half-carry flag when a carry occurs between bits 3

and 4 of the accumulator during an ADD or ADC operation. The half-

carry flag is required for binary-coded decimal (BCD) arithmetic

operations.

Bit

Read:

Write:

Reset:

Loaded with vector from $1FFE and $1FFF

Figure 4-5. Program Counter (PC)

Bit 7

Bit 0

Read:

HIN

Write:

Reset:

= Unimplemented

U = Unaffected

Figure 4-6. Condition Code Register (CCR)

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

MC68HC705P9CS 数据表(PDF) 48 Page - Freescale Semiconductor, Inc

MC68HC705P9CS 数据表(HTML) 48 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载