| 数据搜索系统,热门电子元器件搜索 |
|
ST7MC1 数据表(PDF) 157 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST7MC1 数据表(HTML) 157 Page - STMicroelectronics |
|
157 / 308 page ![]() ST7MC1/ST7MC2 157/308 MOTOR CONTROLLER (Cont’d) 10.6.6.8 Position Sensor Mode In position sensor mode (SR=1 in MCRA register), the rotor position information is given to the periph- eral by means of logical data on the three inputs MCIA, MCIB and MCIC (Hall sensors). For each step one of these three inputs is selected (IS[1:0] bits in register MPHST) in order to detect the Z event. Be careful that the phase comparator is OFF until CKE and /or DAC bits are set in MCRA register. In sensor mode, Demagnetization and the related features (such as the special PWM configuration, DS or DH management, programmable filter) are not available (see Table 32) Table 32. Demagnetisation access In sensor mode configuration the rotor detection doesn’t need a particular phase configuration to perform the measurement and a Z event can be read from any detection window. The sampling is done at a selectable frequency (fSCF), see Table 82. This means that Z event position sensoring is more precise than it is in sensorless mode. There is no minimum off time required for current control PWM in sensor mode so the minimum off time is set automatically to 0µs as soon as the SR bit is set in the MCRA register and a true 100% duty cycle can be set in the PWM compare U reg- ister for the PWM generation in voltage mode. In Sensor mode, the ZEF[3:0] bits in the MZFR register are active and can be used to define the number of consecutive Z samples needed to gen- erate the active event. Procedure for reading sensor inputs in Direct Access mode: In Direct Access mode, the sen- sors can be read either when the clock are ena- bled or disabled (depending on CKE it in MCRA register). To read the sensor data the following steps have to be performed: 1. Select Direct Access Mode (DAC bit in MCRA register) 2. Select the appropriate MCIx input pin by means of the IS[1:0] bits in the MPHST register 3. Read the comparator output (HST bit in the MREF register) SR bit MCRA register Demagnetisation feature availabilty 1NO 0YES 1 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |