LSM6DSL datasheet(86/113 Pages) STMICROELECTRONICS

86 / 113 page

LSM6DSL

86/113

DocID028475 Rev 5

9.75

TAP_CFG (58h)

Enables interrupt and inactivity functions, configuration of filtering and tap recognition

functions (r/w).

Table 182. TAP_CFG register

INTERRUPTS

_ENABLE

INACT_EN1 INACT_EN0

SLOPE

_FDS

TAP_X_EN TAP_Y_EN TAP_Z_EN

LIR

Table 183. TAP_CFG register description

INTERRUPTS

_ENABLE

Enable basic interrupts (6D/4D, free-fall, wake-up, tap, inactivity). Default 0.

(0: interrupt disabled; 1: interrupt enabled)

INACT_EN[1:0]

Enable inactivity function. Default value: 00

(00: disabled

01: sets accelerometer ODR to 12.5 Hz (low-power mode), gyro does not change;

10: sets accelerometer ODR to 12.5 Hz (low-power mode), gyro to sleep mode;

11: sets accelerometer ODR to 12.5 Hz (low-power mode), gyro to power-down

mode)

SLOPE_FDS

HPF or SLOPE filter selection on wake-up and Activity/Inactivity functions. Refer to

Figure 8. Default value: 0

(0: SLOPE filter applied; 1: HPF applied)

TAP_X_EN

Enable X direction in tap recognition. Default value: 0

(0: X direction disabled; 1: X direction enabled)

TAP_Y_EN

Enable Y direction in tap recognition. Default value: 0

(0: Y direction disabled; 1: Y direction enabled)

TAP_Z_EN

Enable Z direction in tap recognition. Default value: 0

(0: Z direction disabled; 1: Z direction enabled)

LIR

Latched Interrupt. Default value: 0

(0: interrupt request not latched; 1: interrupt request latched)

LSM6DSL 数据表(PDF) 86 Page - STMicroelectronics

LSM6DSL 数据表(HTML) 86 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载