ST7MC1K2-Auto datasheet(363/371 Pages) STMICROELECTRONICS

363 / 371 page

Obsolete

Product(s)

- Obsolete

Product(s)

ST7MC1K2-Auto, ST7MC1K6-Auto, ST7MC2S4-Auto, ST7MC2S6-Auto

Known limitations

363/371

15.3.2

Workaround

Disable the timer interrupt before disabling the timer. While enabling, first enable the timer,

then enable the timer interrupts.

Perform the following to disable the timer

●

TACR1 = 0x00h; // Disable the compare interrupt.

●

TACSR | = 0x40; // Disable the timer.

Perform the following to enable the timer again

●

TACSR & = ~0x40; // Enable the timer.

●

TACR1 = 0x40; // Enable the compare interrupt.

15.4

LINSCI limitations

15.4.1

LINSCI wrong break duration

SCI mode

A single break character is sent by setting and resetting the SBK bit in the SCICR2 register.

In some cases, the break character may have a longer duration than expected:

●

20 bits instead of 10 bits if M = 0

●

22 bits instead of 11 bits if M = 1.

In the same way, as long as the SBK bit is set, break characters are sent to the TDO pin.

This may lead to generate one break more than expected.

Occurrence

The occurrence of the problem is random and proportional to the baudrate. With a transmit

frequency of 19200 baud (fCPU = 8 MHz and SCIBRR = 0xC9), the wrong break duration

occurrence is around 1%.

Workaround

If this wrong duration is not compliant with the communication protocol in the application,

software can request that an Idle line be generated before the break character. In this case,

the break duration is always correct assuming the application is not doing anything between

the idle and the break. This can be ensured by temporarily disabling interrupts.

The exact sequence is:

●

Disable interrupts

●

Reset and set TE (IDLE request)

●

Set and reset SBK (break request)

●

Re-enable interrupts

LIN mode

If the LINE bit in the SCICR3 is set and the M bit in the SCICR1 register is reset, the LINSCI

is in LIN master mode. A single break character is sent by setting and resetting the SBK bit

in the SCICR2 register. In some cases, the break character may have a longer duration than

expected:

●

24 bits instead of 13 bits

Obsolete

Product(s)

- Obsolete

Product(s)

ST7MC1K2-Auto 数据表(PDF) 363 Page - STMicroelectronics

ST7MC1K2-Auto 数据表(HTML) 363 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

ST7MC1K2-Auto 数据表(PDF) 363 Page - STMicroelectronics

ST7MC1K2-Auto 数据表(HTML) 363 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载