XIO2000 datasheet(55/150 Pages) TI

55 / 150 page

Classic PCI Configuration Space

November 2005

SCPS097B

4.4

Status Register

The status register provides information about the PCI Express interface to the system. See Table 4−3 for a

complete description of the register contents.

PCI register offset:

06h

Read-only, Read/Clear

Default value:

0010h

BIT NUMBER

RESET STATE

Table 4−3. Status Register Description

BIT

FIELD NAME

ACCESS

DESCRIPTION

PAR_ERR

RCU

Detected parity error. This bit is set when the PCI Express interface receives a poisoned TLP. This

bit is set regardless of the state of bit 6 (PERR_ENB) in the command register (offset 04h, see

Section 4.3).

0 = No parity error detected

1 = Parity error detected

SYS_ERR

RCU

Signaled system error. This bit is set when the bridge sends an ERR_FATAL or ERR_NONFATAL

message and bit 8 (SERR_ENB) in the command register (offset 04h, see Section 4.3) is set.

0 = No error signaled

1 = ERR_FATAL or ERR_NONFATAL signaled

MABORT

RCU

Received master abort. This bit is set when the PCI Express interface of the bridge receives a

completion-with-unsupported-request status.

0 = Unsupported request not received on the PCI Express interface

1 = Unsupported request received on the PCI Express interface

TABORT_REC

RCU

Received target abort. This bit is set when the PCI Express interface of the bridge receives a

completion-with-completer-abort status.

0 = Completer abort not received on the PCI Express interface

1 = Completer abort received on the PCI Express interface

TABORT_SIG

RCU

Signaled target abort. This bit is set when the PCI Express interface completes a request with

completer abort status.

0 = Completer abort not signaled on the PCI Express interface

1 = Completer abort signaled on the PCI Express interface

10:9

PCI_SPEED

DEVSEL timing. These bits are read-only 00b, because they do not apply to PCI Express.

DATAPAR

RCU

Master data parity error. This bit is set if bit 6 (PERR_ENB) in the command register (offset 04h,

see Section 4.3) is set and the bridge receives a completion with data marked as poisoned on the

PCI Express interface or poisons a write request received on the PCI Express interface.

0 = No uncorrectable data error detected on the primary interface

1 = Uncorrectable data error detected on the primary interface

FBB_CAP

Fast back-to-back capable. This bit does not have a meaningful context for a PCI Express device

and is hardwired to 0b.

RSVD

Reserved. Returns 0b when read.

66MHZ

66-MHz capable. This bit does not have a meaningful context for a PCI Express device and is

hardwired to 0b.

CAPLIST

Capabilities list. This bit returns 1b when read, indicating that the bridge supports additional PCI

capabilities.

INT_STATUS

Interrupt status. This bit reflects the interrupt status of the function. This bit is read-only 0b since

the bridge does not generate any interrupts internally.

2:0

RSVD

Reserved. Returns 000b when read.

XIO2000 数据表(PDF) 55 Page - Texas Instruments

XIO2000 数据表(HTML) 55 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载