XIO2000 datasheet(88/150 Pages) TI

88 / 150 page

Classic PCI Configuration Space

November 2005

SCPS097B

Table 4−39. General Control Register Description (Continued)

BIT

FIELD NAME

ACCESS

DESCRIPTION

19†

READ_

PREFETCH_

DIS

Read prefetch disable. This bit controls the prefetch functionality on PCI memory read transactions.

0 = Prefetch to the next cache line boundary on a burst read (default)

1 = Fetch only a single DWORD on a burst read

18:16†

L0s_LATENCY

L0s maximum exit latency. This field programs the maximum acceptable latency when exiting the L0s

state. This sets bits 8:6 (EP_L0S_LAT) in the device capabilities register (offset 94h, see Section

4.49).

000 = Less than 64 ns

001 = 64 ns up to less than 128 ns

010 = 128 ns up to less than 256 ns

011 = 256 ns up to less than 512 ns

100 = 512 ns up to less than 1

µs

101 = 1

µs up to less than 2 µs

110 = 2

µs to 4 µs (default)

111 = More than 4

µs

15:13†

L1_LATENCY

L1 maximum exit latency. This field programs the maximum acceptable latency when exiting the L1

state. This sets bits 11:9 (EP_L1_LAT) in the device capabilities register (offset 94h, see

Section 4.49).

000 = Less than 1

µs

001 = 1

µs up to less than 2 µs

010 = 2

µs up to less than 4 µs

011 = 4

µs up to less than 8 µs

100 = 8

µs up to less than 16 µs

101 = 16

µs up to less than 32 µs

110 = 32

µs to 64 µs (default)

111 = More than 64

µs

12†

VC_CAP_EN

VC capability structure enable. This bit enables the VC capability structure by changing the next

offset field of the advanced error reporting capability register at offset 102h.

0 = VC capability structure disabled (offset field = 000h)

1 = VC capability structure enabled (offset field = 150h)

11k

BPCC_E

Bus power clock control enable. This bit controls whether the secondary bus PCI clocks are stopped

when the bridge is placed in the D3 state. It is assumed that if the secondary bus clocks are required

to be active, that a reference clock continues to be provided on the PCI Express interface.

0 = Secondary bus clocks are not stopped in D3 (default)

1 = Secondary bus clocks are stopped on D3

10k

BEACON_

ENABLE

Beacon enable. This bit controls the mechanism for waking up the physical PCI Express link when in

L2.

0 = WAKE mechanism is used exclusively. Beacon is not used (default).

1 = Beacon and WAKE mechanisms are used

9:8†

MIN_POWER_

SCALE

Minimum power scale. This value is programmed to indicate the scale of bits 7:0

(MIN_POWER_VALUE).

00 = 1.0x (default)

01 = 0.1x

10 = 0.01x

11 = 0.001x

7:0†

MIN_POWER_

VALUE

Minimum power value. This value is programmed to indicate the minimum power requirements. This

value is multiplied by the minimum power scale field (bits 9:8) to determine the minimum power

requirements for the bridge. The default is 00h, because this feature is only usable when the system

implementer adds the PCI devices’ power consumption to the bridge power consumption and

reprograms this field with an EEPROM or the system BIOS.

† These bits are reset by a PCI Express reset (PERST), a GRST, or the internally-generated power-on reset.

kThese bits are sticky and must retain their value when the bridge is powered by VAUX.

XIO2000 数据表(PDF) 88 Page - Texas Instruments

XIO2000 数据表(HTML) 88 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载