| 数据搜索系统,热门电子元器件搜索 |
|
MPC8360 数据表(PDF) 37 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MPC8360 数据表(HTML) 37 Page - Freescale Semiconductor, Inc |
|
37 / 112 page ![]() MPC8360E/MPC8358E PowerQUICC™ II Pro Processor Revision 2.x TBGA Silicon Hardware Specifications, Rev. 2 Freescale Semiconductor 37 UCC Ethernet Controller: Three-Speed Ethernet, MII Management Figure 19 shows the RGMII and RTBI AC timing and multiplexing diagrams. Figure 19. RGMII and RTBI AC Timing and Multiplexing Diagrams GTX_CLK125 reference clock duty cycle tG125H/tG125 47 — 53 % Notes: 1. Note that, in general, the clock reference symbol representation for this section is based on the symbols RGT to represent RGMII and RTBI timing. For example, the subscript of tRGT represents the TBI (T) receive (RX) clock. Note also that the notation for rise (R) and fall (F) times follows the clock symbol that is being represented. For symbols representing skews, the subscript is skew (SK) followed by the clock that is being skewed (RGT). 2. This implies that PC board design will require clocks to be routed such that an additional trace delay of greater than 1.5 ns will be added to the associated clock signal. 3. For 10 and 100 Mbps, tRGT scales to 400 ns ± 40 ns and 40 ns ± 4 ns, respectively. 4. Duty cycle may be stretched/shrunk during speed changes or while transitioning to a received packet's clock domains as long as the minimum duty cycle is not violated and stretching occurs for no more than three tRGT of the lowest speed transitioned between. 5. Duty cycle reference is LVDD/2. 6. This symbol is used to represent the external GTX_CLK125 and does not follow the original symbol naming convention. 7. In rev 2.0 silicon, due to errata, tSKRGTKHDX minimum is -2.3 ns and tSKRGTKHDV maximum is 1 ns for UCC1, 1.2 ns for UCC2 option 1, and 1.8 for UCC2 option 2. In rev2.1 silicon, due to errata, tSKRGTKHDX minimum is -0.65 ns for UCC2 option 1 and -0.9 for UCC2 option 2, and tSKRGTKHDV maximum is 0.75 ns for UCC1 and UCC2 option 1 and 0.85 for UCC2 option 2. Please refer to QE_ENET10 in the device errata document. UCC1 does meet tSKRGTKHDX minimum for rev2.1 silicon. Table 35. RGMII and RTBI AC Timing Specifications (continued) At recommended operating conditions with LVDD of 2.5 V ± 5%. GTX_CLK tRGT tRGTH tSKRGTKHDX TX_CTL TXD[8:5] TXD[7:4] TXD[9] TXERR TXD[4] TXEN TXD[3:0] (At Transmitter) TXD[8:5][3:0] TXD[7:4][3:0] TX_CLK (At PHY) RX_CTL RXD[8:5] RXD[7:4] RXD[9] RXERR RXD[4] RXDV RXD[3:0] RXD[8:5][3:0] RXD[7:4][3:0] RX_CLK (At PHY) tSKRGTKHDX tSKRGTKHDX tSKRGTKHDX |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |