H8SSLASH2218 datasheet(423/750 Pages) RENESAS

423 / 750 page

Section 12 Serial Communication Interface

Rev.6.00 Jun. 03, 2008 Page 375 of 698

REJ09B0074-0600

• Smart Card Interface Mode (When SMIF in SCMR is 1)

Bit

Bit Name Initial Value

R/W

Description

TIE

R/W

Transmit Interrupt Enable

When this bit is set to 1, TXI interrupt request is enabled.

TXI interrupt request cancellation can be performed by

reading 1 from the TDRE flag in SSR, then clearing it to

0, or clearing the TIE bit to 0.

RIE

R/W

Receive Interrupt Enable

When this bit is set to 1, RXI and ERI interrupt requests

are enabled.

RXI and ERI interrupt request cancellation can be

performed by reading 1 from the RDRF, FER, PER, or

ORER flag in SSR, then clearing the flag to 0, or clearing

the RIE bit to 0.

R/W

Transmit Enable

When this bit s set to 1, transmission is enabled.

In this state, serial transmission is started when transmit

data is written to TDR and the TDRE flag in SSR is

cleared to 0.

SMR setting must be performed to decide the transfer

format before setting the TE bit to 1. When this bit is

cleared to 0, the transmission operation is disabled, and

the TDRE flag is fixed at 1.

R/W

Receive Enable

When this bit is set to 1, reception is enabled.

Serial reception is started in this state when a start bit is

detected in asynchronous mode or serial clock input is

detected in clocked synchronous mode.

SMR setting must be performed to decide the reception

format before setting the RE bit to 1.

Clearing the RE bit to 0 does not affect the RDRF,

FER,PER, and ORER flags, which retain their states.

H8S/2218 数据表(PDF) 423 Page - Renesas Technology Corp

H8S/2218 数据表(HTML) 423 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载