H8SSLASH2225 datasheet(205/1071 Pages) RENESAS

205 / 1071 page

Section 4 Exception Handling

Rev. 5.00 Aug 08, 2006 page 119 of 982

REJ09B0054-0500

Section 4 Exception Handling

4.1

Exception Handling Types and Priority

As table 4.1 indicates, exception handling may be caused by a reset, trace, trap instruction, or

interrupt. Exception handling is prioritized as shown in table 4.1. If two or more exceptions occur

simultaneously, they are accepted and processed in order of priority. Trap instruction exception

handling requests are accepted at all times in program execution state.

Exception sources, the stack structure, and operation of the CPU vary depending on the interrupt

control mode set by the INTM1 and INTM0 bits in SYSCR.

Table 4.1

Exception Types and Priority

Priority

Exception Type

Start of Exception Handling

High

Reset

Starts immediately after a low-to-high transition at the

RES

MRES pin, or when the watchdog timer overflows. The

CPU enters the power-on reset state when the

RES pin is

low. The CPU enters the manual reset state when the

MRES pin is low.

Trace

Starts when execution of the current instruction or exception

handling ends, if the trace (T) bit in the EXR is set to 1.

Traces are enabled only in interrupt control mode 2. Trace

exception handling is not executed after execution of an

RTE instruction.

Interrupt

Starts when execution of the current instruction or exception

handling ends, if an interrupt request has been issued.

Interrupt detection is not performed on completion of ANDC,

ORC, XORC, or LDC instruction execution, or on

completion of reset exception handling.

Low

Trap instruction

(TRAPA)

Started by execution of a trap instruction (TRAPA). Trap

instruction exception handling requests are accepted at all

times in program execution state.

4.2

Exception Sources and Exception Vector Table

Different vector addresses are assigned to different exception sources. Table 4.2 lists the exception

sources and their vector addresses.

H8S/2225 数据表(PDF) 205 Page - Renesas Technology Corp

H8S/2225 数据表(HTML) 205 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载