H8SSLASH2225 datasheet(207/1071 Pages) RENESAS

207 / 1071 page

Section 4 Exception Handling

Rev. 5.00 Aug 08, 2006 page 121 of 982

REJ09B0054-0500

4.3

Reset

A reset has the highest exception priority.

When the

RES or MRES pin goes low, all processing halts and this LSI enters the reset. A reset

initializes the internal state of the CPU and the registers of on-chip peripheral modules. The

interrupt control mode is 0 immediately after reset.

When the

RES or MRES pin goes high from the low state, this LSI starts reset exception handling.

The chip can also be reset by overflow of the watchdog timer. For details see section 13,

Watchdog Timer (WDT).

4.3.1

Reset Types

The power-on reset and the manual reset are available as the reset.

Table 4.3 lists the reset types. When the power is supplied, select the power-on reset.

Both the power-on reset and the manual reset initialize the internal state of the CPU. The power-

on reset initializes all registers in on-chip peripheral modules. The manual reset initializes the

registers in on-chip peripheral modules except the bus controller and the I/O ports. The state of the

bus controller and the I/O ports are maintained.

At the manual reset, the on-chip peripheral modules are initialized. Thus, the ports that are used as

I/O pins for the on-chip peripheral modules are changed to the ports controlled by the DDR and

the DR.

Table 4.3

Reset Types

Condition

to Enter Reset

Internal State

Reset

MRES

RES

CPU

Internal Peripheral Modules

Power-on reset

Low

Initialized

Manual reset

Low

High

Initialized

Initialized except the bus controller and the

I/O ports

Legend:

×:Don’t care

The power-on reset and the manual reset are also available for the reset by the watchdog timer.

To enable the

MRES pin, set the MRESE bit in SYSCR to 1.

H8S/2225 数据表(PDF) 207 Page - Renesas Technology Corp

H8S/2225 数据表(HTML) 207 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载