AX2000 datasheet(10/262 Pages) MICROSEMI

10 / 262 page

General Description

1- 4

R ev isio n 1 8

The SRAM blocks are arranged in a column on the west side of the tile (Figure 1-6 on page 1-4).

Embedded Memory

As mentioned earlier, each core tile has either three (in a smaller tile) or four (in the regular tile)

embedded SRAM blocks along the west side, and each variable-aspect-ratio SRAM block is 4,608 bits in

size. Available memory configurations are: 128x36, 256x18, 512x9, 1kx4, 2kx2 or 4kx1 bits. The

individual blocks have separate read and write ports that can be configured with different bit widths on

each port. For example, data can be written in by eight and read out by one.

In addition, every SRAM block has an embedded FIFO control unit. The control unit allows the SRAM

block to be configured as a synchronous FIFO without using core logic modules. The FIFO width and

depth are programmable. The FIFO also features programmable ALMOST-EMPTY (AEMPTY) and

ALMOST-FULL (AFULL) flags in addition to the normal EMPTY and FULL flags. In addition to the flag

logic, the embedded FIFO control unit also contains the counters necessary for the generation of the

read and write address pointers as well as control circuitry to prevent metastability and erroneous

operation. The embedded SRAM/FIFO blocks can be cascaded to create larger configurations.

I/O Logic

The Axcelerator family of FPGAs features a flexible I/O structure, supporting a range of mixed voltages

with its bank-selectable I/Os: 1.5V, 1.8V, 2.5V, and 3.3V. In all, Axcelerator FPGAs support at least 14

different I/O standards (single-ended, differential, voltage-referenced). The I/Os are organized into

banks, with eight banks per device (two per side). The configuration of these banks determines the I/O

standards supported (see "User I/Os" on page 2-11 for more information). All I/O standards are available

in each bank.

Each I/O module has an input register (InReg), an output register (OutReg), and an enable register

(EnReg) (Figure 1-7 on page 1-5). An I/O Cluster includes two I/O modules, four RX modules, two TX

modules, and a buffer (B) module.

Figure 1-6 •

AX Device Architecture (AX1000 shown)

Chip Layout

SuperCluster

I/O Structure

See Figure 7

RAMC

Core Tile

RAM/

FIFO

RAM/

FIFO

RAM/

FIFO

RAM/

FIFO

AX2000 数据表(PDF) 10 Page - Microsemi Corporation

AX2000 数据表(HTML) 10 Page - Microsemi Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

AX2000 数据表(PDF) 10 Page - Microsemi Corporation

AX2000 数据表(HTML) 10 Page - Microsemi Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载