PM0056 datasheet(89/156 Pages) STMICROELECTRONICS

89 / 156 page

DocID15491 Rev 5

89/156

PM0056

The Cortex-M3 instruction set

3.8.1

BFC and BFI

Bit Field Clear and Bit Field Insert.

Syntax

BFC{cond} Rd, #lsb, #width

BFI{cond} Rd, Rn, #lsb, #width

where:

•

‘cond’ is an optional condition code, see Conditional execution on page 57.

•

‘Rd’ is the destination register.

•

‘Rn’ is the source register.

•

‘lsb’ is the position of the least significant bit of the bitfield. lsb must be in the range 0 to

31.

•

‘width’ is the width of the bitfield and must be in the range 1 to 32-lsb.

Operation

BFC clears a bitfield in a register. It clears width bits in Rd, starting at the low bit position lsb.

Other bits in Rd are unchanged.

BFI copies a bitfield into one register from another register. It replaces width bits in Rd

starting at the low bit position lsb, with width bits from Rn starting at bit[0]. Other bits in Rd

are unchanged.

Restrictions

Do not use SP and do not use PC.

Condition flags

These instructions do not affect the flags.

Examples

BFC

R4, #8, #12

; Clear bit 8 to bit 19 (12 bits) of R4 to 0

BFI

R9, R2, #8, #12

; Replace bit 8 to bit 19 (12 bits) of R9 with

; bit 0 to bit 11 from R2

3.8.2

SBFX and UBFX

Signed Bit Field Extract and Unsigned Bit Field Extract.

Syntax

SBFX{cond} Rd, Rn, #lsb, #width

UBFX{cond} Rd, Rn, #lsb, #width

PM0056 数据表(PDF) 89 Page - STMicroelectronics

PM0056 数据表(HTML) 89 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载