| 数据搜索系统,热门电子元器件搜索 |
|
TNETV1644ZDU6 数据表(PDF) 90 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
TNETV1644ZDU6 数据表(HTML) 90 Page - Texas Instruments |
|
90 / 306 page ![]() 3.4.2.2 BOOTCMPLT Register TMS320DM6437 Digital Media Processor SPRS345D – NOVEMBER 2006 – REVISED JUNE 2008 www.ti.com If the bootloader code detects an error during boot, it records the error status in the Boot Complete (BOOTCMPLT) register. In addition, the BOOTCMPLT register is used for communication between the external host and the bootloader code during a Host Boot (PCI Boot or HPI boot). Once the external host has completed boot, it must perform the following communication with the bootloader code: • Write the desired 32-bit CPU starting address in the DSPBOOTADDR register (see Section 3.4.2.3, DSPBOOTADDR Register). • Write a ‘1’ to the Boot Complete (BC) bit field in the BOOTCMPLT register to indicate that the host has completed booting this device. Once the bootloader code detects BC = 1, it directs the CPU to begin executing from the DSPBOOTADDR register. The BOOTCMPLT register is reset by any device-level global reset. For the list of device-level global resets, see Section 6.5, Reset. 31 20 19 16 RESERVED ERR R/W-0000 0000 0000 R/W-0000 15 1 0 RESERVED BC R/W- 0000 0000 0000 000 R/W-0 LEGEND: R = Read; W = Write; -n = value after reset Figure 3-4. BOOTCMPLT Register— 0x01C4 000C Table 3-10. BOOTCMPLT Register Description Bit Field Name Description 31:20 RESERVED Reserved. For proper device operation, the user should only write "0" to these bits. Boot Error 0000 = No Error (default). 19:16 ERR 0001 - 1111 = bootloader software detected a boot error and aborted the boot. For the error codes, see the Using the TMS320DM643x DMP Bootloader Application Report (literature number SPRAAG0). 15:1 RESERVED Reserved. For proper device operation, the user should only write "0" to these bits. Boot Complete Flag from Host This field is only applicable to Host Boots. 0 BC 0 = Host has not completed booting this device (default). 1 = Host has completed booting this device. DSP can begin executing from the DSPBOOTADDR register value. Device Configurations 90 Submit Documentation Feedback |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |