 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
SPC560P34L1 数据表(PDF) 49 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
SPC560P34L1 数据表(HTML) 49 Page - STMicroelectronics |
|
|
49 / 103 page  SPC560P34L1, SPC560P34L3, SPC560P40L1, SPC560P40L3 Electrical characteristics Doc ID 16100 Rev 7 49/103 VDD_HV_ADC0 SR 5.0 V ADC_0 supply and high reference voltage —4.5 5.5 V Relative to VDD_HV_REG VDD_HV_REG –0.1 — VSS_HV_ADC0 SR ADC_0 ground and low reference voltage —0 0 V VDD_LV_REGCOR (3) ,(4) CC Internal supply voltage — — — V VSS_LV_REGCOR (3) SR Internal reference voltage —0 0 V VDD_LV_CORx (3),(4) CC Internal supply voltage — — — V VSS_LV_CORx (3) SR Internal reference voltage —0 0 V TA SR Ambient temperature under bias fCPU =60 MHz −40 125 °C fCPU =64MHz −40 105 °C 1. Full functionality cannot be guaranteed when voltage drops below 4.5 V. In particular, ADC electrical characteristics and I/Os DC electrical specification may not be guaranteed. 2. The difference between each couple of voltage supplies must be less than 100 mV, ⏐V DD_HV_IOy – VDD_HV_IOx ⏐ < 100 mV. 3. To be connected to emitter of external NPN. Low voltage supplies are not under user control—they are produced by an on- chip voltage regulator—but for the device to function properly the low voltage grounds (VSS_LV_xxx) must be shorted to high voltage grounds (VSS_HV_xxx) and the low voltage supply pins (VDD_LV_xxx) must be connected to the external ballast emitter. 4. The low voltage supplies (VDD_LV_xxx) are not all independent. – VDD_LV_COR1 and VDD_LV_COR2 are shorted internally via double bonding connections with lines that provide the low voltage supply to the data flash memory module. Similarly, VSS_LV_COR1 and VSS_LV_COR2 are internally shorted. – VDD_LV_REGCOR and VDD_LV_RECORx are physically shorted internally, as are VSS_LV_REGCOR and VSS_LV_CORx. Table 10. Recommended operating conditions (5.0 V) (continued) Symbol Parameter Conditions Value Unit Min Max(1) Table 11. Recommended operating conditions (3.3 V) Symbol Parameter Conditions Value Unit Min Max(1) VSS SR Device ground — 0 0 V VDD_HV_IOx (2) SR 3.3 V input/output supply voltage —3.0 3.6 V VSS_HV_IOx SR Input/output ground voltage —0 0 V VDD_HV_OSC SR 3.3 V crystal oscillator amplifier supply voltage —3.0 3.6 V Relative to VDD_HV_IOx VDD_HV_IOx –0.1 VDD_HV_IOx +0.1 VSS_HV_OSC SR 3.3 V crystal oscillator amplifier reference voltage —0 0 V |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
