AM186ED-20KCSLASHW datasheet(34/88 Pages) AMD

34 / 88 page

Am186ED/EDLV Microcontrollers

PRELI M INARY

F T

BUS OPERATION

The industry-standard 80C186 and 80C188 microcon-

trollers use a multiplexed address and data (AD) bus.

The address is present on the AD bus only during the

t1 clock phase. The Am186ED/EDLV microcontrollers

continue to provide the multiplexed AD bus and, in ad-

dition, provides a nonmultiplexed address (A) bus. The

A bus provides an address to the system for the com-

plete bus cycle (t1–t4).

For systems where power consumption is a concern, it

is possible to disable the address from being driven on

the AD bus during the normal address portion of the

bus cycle for accesses to RAS0, RAS1, UCS, and/or

LCS address spaces. In this mode, the affected bus is

placed in a high-impedance state during the address

portion of the bus cycle. This feature is enabled

through the DA bits in the UMCS and LMCS registers.

When address disable is in effect, the number of sig-

nals that assert on the bus during all normal bus cycles

to the associated address space is reduced, decreas-

ing power consumption and reducing processor switch-

ing noise. In 8-bit mode, the address is driven on

AD15–AD8 during the data portion of the bus cycle re-

gardless of the setting of the DA bits.

If the ADEN pin is pulled Low during processor reset,

the value of the DA bits in the UMCS and LMCS regis-

ters is ignored and the address is driven on the AD bus

for all accesses, thus preserving the industry-standard

80C186 and 80C188 microcontrollers’ multiplexed ad-

dress bus and providing support for existing emulation

tools.

The following diagrams show the bus cycles of the

Am186ED/EDLV microcontrollers when the address

bus disable feature is in effect:

Figure 4 shows the affected signals during a normal

read or write operation for 16-bit mode. The address

and data are multiplexed onto the AD bus.

Figure 5 shows a 16-bit mode bus cycle when address

bus disable is in effect. This results in the AD bus oper-

ating in a nonmultiplexed address/data mode. The A

bus has the address during a read or write operation.

Figure 6 shows the affected signals during a normal

read or write operation for 8-bit mode. The multiplexed

address/data mode is compatible with the 80C186 and

80C188 microcontrollers and might be used to take ad-

vantage of existing logic or peripherals.

Figure 7 shows an 8-bit mode bus cycle when address

bus disable is in effect. The address and data are not

multiplexed. The AD7–AD0 signals have only data on

the bus, while the AD bus has the address during a

read or write operation.

Figure 4.

16-Bit Mode—Normal Read and Write Operation

CLKOUTA

AD15–AD0

(Read)

AD15–AD0

(Write)

LCS or UCS

Data

Address

Phase

Data

Phase

A19–A0

MCSx, PCSx

Note: For a detailed description of DRAM control signals, see DRAM switching characteristics

beginning on page 70.

Address

Data

Address

AM186ED-20KC/W 数据表(PDF) 34 Page - Advanced Micro Devices

AM186ED-20KC/W 数据表(HTML) 34 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88

数据表下载

链接网址

AM186ED-20KC/W 数据表(PDF) 34 Page - Advanced Micro Devices

AM186ED-20KC/W 数据表(HTML) 34 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88

数据表 下载

链接网址

数据表下载