| 数据搜索系统,热门电子元器件搜索 |
|
AM186ED-20KC/W 数据表(PDF) 49 Page - Advanced Micro Devices |
|
|
|||||||||||||||||||||||||||||
AM186ED-20KC/W 数据表(HTML) 49 Page - Advanced Micro Devices |
|
49 / 88 page ![]() Am186ED/EDLV Microcontrollers 49 PRELI M INARY D RA F T ABSOLUTE MAXIMUM RATINGS Storage temperature Am186ED........................................ –65 °C to +125°C Am186EDLV.................................... –65 °C to +125°C Voltage on any pin with respect to ground Am186ED................................... –0.5 V to Vcc +0.5 V Am186EDLV............................... –0.5 V to Vcc +0.5 V Note: Stresses above those listed under Absolute Maximum Ratings may cause permanent device fail- ure. Functionality at or above these limits is not implied. Exposure to absolute maximum ratings for extended periods may affect device reliability. OPERATING RANGES Am186ED Microcontroller Commercial (TC) .................................0°C to +100°C Industrial* (TA)...................................–40°C to +85°C Supply voltage (VCC) .................................5 V ± 10% Am186EDLV Microcontroller Commercial (TA) ................................... 0°C to +70°C VCC up to 25 MHz................................. 3.3 V ± 0.3 V Where: TC = case temperature TA = ambient temperature *Industrial versions of Am186ED microcontrollers are available in 20 and 25 MHz operating frequencies only. DC CHARACTERISTICS OVER COMMERCIAL AND INDUSTRIAL OPERATING RANGES Notes: a The LCS/ONCE0/RAS0 and UCS/ONCE1 pins have weak internal pullup resistors. Loading the LCS/ONCE0/RAS0 and UCS/ONCE1 pins in excess of IOH = –200 µA during reset can cause the device to go into ONCE mode. b Current is measured with the device in RESET with X1 and X2 driven and all other non-power pins open but held High or Low. c Testing is performed with the pins floating, either during HOLD or by invoking the ONCE mode. Symbol Parameter Description Test Conditions Preliminary Unit Min Max VIL Input Low Voltage (Except X1) –0.5 0.2VCC –0.3 V VIL1 Clock Input Low Voltage (X1) –0.5 0.8 V VIH Input High Voltage (Except RES and X1) 2.0 VCC +0.5 V VIH 1 Input High Voltage (RES)2.4 VCC +0.5 V VIH 2 Clock Input High Voltage (X1) VCC –0.8 VCC +0.5 V VOL Output Low Voltage Am186ED IOL= 2.5 mA (S2–S0) IOL= 2.0 mA (others) 0.45 V Am186EDLV IOL= 1.5 mA (S2–S0) IOL= 1.0 mA (others) 0.45 V VOH Output High Voltage(a) Am186ED IOH= –2.4 mA @ 2.4 V 2.4 VCC +0.5 V IOH= –200 µA @ VCC –0.5 VCC –0.5 VCC V Am186EDLV IOH= –200 µA @ VCC –0.5 VCC –0.5 VCC V ICC Power Supply Current @ 0 °CV CC = 5.5 V (b) VCC = 3.6 V (b) 5.9 4.0 mA/MHz ILI Input Leakage Current @ 0.5 MHz 0.45 V ≤V IN≤V CC ±10 µA ILO Output Leakage Current @ 0.5 MHz 0.45 V ≤V OUT≤V CC (c) ±10 µA VCLO Clock Output Low ICLO= 4.0 mA 0.45 V VCHO Clock Output High ICHO= –500 µAVCC –0.5 V |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |