LSM6DSTX datasheet(95/175 Pages) STMICROELECTRONICS

部件名	LSM6DSTX

功能描述	iNEMO inertial module: always-on 3-axis accelerometer and 3-axis gyroscope with embedded machine learning core

PDF	175 Pages

Scroll/Zoom	100%

制造商	STMICROELECTRONICS [STMicroelectronics]

网页	http://www.st.com

标志

95 / 175 page

11.10

SPI2_INT_OIS (6Fh)

OIS interrupt configuration register and accelerometer self-test enable setting. The auxiliary SPI interface can

write this register when the OIS_CTRL_FROM_UI bit in the FUNC_CFG_ACCESS (01h) register is equal to 0

(SPI2 full-control mode). This register is read-only when the OIS_CTRL_FROM_UI bit is equal to 1 (primary IF

full-control mode) and shows the content of the UI_INT_OIS (6Fh) register.

Table 216. SPI_INT_OIS register

INT2_

DRDY_OIS

LVL2_OIS

DEN_LH_OIS

0(1)

ST1_XL_

OIS

ST0_XL_

OIS

1. This bit must be set to 0 for the correct operation of the device.

Table 217. SPI_INT_OIS register description

INT2_DRDY_OIS Enables OIS chain DRDY on the INT2 pin. This setting has priority over all other INT2 settings.

LVL2_OIS

Enables level-sensitive latched mode on the OIS chain. Default value: 0

DEN_LH_OIS

Indicates polarity of DEN signal on OIS chain

(0: DEN pin is active-low;

1: DEN pin is active-high)

ST[1:0]_XL_OIS

Selects accelerometer self-test - active only if the accelerometer OIS chain is enabled. Default value: 00

(00: normal mode;

01: positive sign self-test;

10: negative sign self-test;

11: reserved)

LSM6DSTX

SPI2_INT_OIS (6Fh)

DS14039 - Rev 1

page 95/175

LSM6DSTX 数据表(PDF) 95 Page - STMicroelectronics

LSM6DSTX 数据表(HTML) 95 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载