ST10F167 datasheet(41/69 Pages) STMICROELECTRONICS

41 / 69 page

41/69

ST10F167

ELECTRICAL CHARACTERISTICS

20.1 Absolute Maximum Ratings

Ambient temperature under bias (TA): ST10F167.................................................................. –40to +85

°C

Storage temperature (T

ST)...................................................................................................

–

65 to +150

°C

Voltage on

DD pins with respect to ground (VSS).................................................................. –0.5 to +6.5 V

Voltage on any pin with respect to ground (V

SS) .............................................................

–0.3to

DD +0.3 V

Input current on any pin during overload condition.............................................................. –10 to +10 mA

Absolute sum of all input currents during overload condition........................................................ |100 mA|

Power dissipation............................................................................................................................... 1.5 W

Note: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device.

This is a stress rating only and functional operation of the device at these or any other conditions above those

indicated in the operational sections of this specification is not guaranteed. Exposure to absolute maximum rating

conditions for extended periods may affect device reliability. During overload conditions (

IN>VDD or VIN<VSS)

the voltage on pins with respect to ground (

VSS) must not exceed the values defined by the Absolute Maximum

Ratings.

20.2 Parameter Interpretation

The parameters listed in the Electrical Character-

istics tables, 20.1 to 20.9, represent the character-

istics of the ST10F167 and its demands on the

system.

Where the ST10F167 logic provides signals with

their respective timing characteristics, the symbol

“CC” for Controller Characteristics, is included in

the “Symbol” column.

Where the external system must provide signals

with their respective timing characteristics to the

ST10F167, the symbol “SR” for System Require-

ment, is included in the “Symbol” column.

ST10F167 数据表(PDF) 41 Page - STMicroelectronics

ST10F167 数据表(HTML) 41 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69

数据表下载