ST10F167 datasheet(46/69 Pages) STMICROELECTRONICS

部件名	ST10F167

功能描述	16-BIT MCU WITH 128K BYTE FLASH MEMORY

PDF	69 Pages

Scroll/Zoom	100%

制造商	STMICROELECTRONICS [STMicroelectronics]

网页	http://www.st.com

标志

46 / 69 page

46/69

ST10F167

fixum.

5:TUE is tested at VAREF=5.0V, VAGND=0V, VDD=4.9V. It is guaranteed by design characterization

for all other voltages within the defined voltage range.

The specified TUE is guaranteed only if an overload condition (see

OV specification) occurs on

maximum 2 not selected analog input pins and the absolute sum of input overload currents on

all analog input pins does not exceed 10 mA.

During the reset calibration sequence the maximum TUE may be

±4 LSB.

6:During the conversion the ADC’s capacitance must be repeatedly charged or discharged. The

internal resistance of the reference voltage source must allow the capacitance to reach its re-

spective voltage level within tCC. The maximum internal resistance results from the programmed

conversion timing.

7:Not 100% tested, guaranteed by design characterization.

ST10F167 数据表(PDF) 46 Page - STMicroelectronics