| 数据搜索系统,热门电子元器件搜索 |
|
R8C/2G 数据表(PDF) 168 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
R8C/2G 数据表(HTML) 168 Page - Renesas Technology Corp |
|
168 / 344 page ![]() R8C/2G Group 17. Timers Rev.1.00 Apr 04, 2008 Page 148 of 318 REJ09B0387-0100 17.1.1 Timer Mode In this mode, the timer counts an internally generated count source (refer to Table 17.2 Timer Mode Specifications). Figure 17.4 shows TRAIOC Register in Timer Mode. Figure 17.4 TRAIOC Register in Timer Mode Table 17.2 Timer Mode Specifications Item Specification Count sources f1, f2, f8, fOCO, fC32 Count operations • Decrement • When the timer underflows, the contents of the reload register are reloaded and the count is continued. Divide ratio 1/(n+1)(m+1) n: Value set in TRAPRE register, m: Value set in TRA register Count start condition 1 (count starts) is written to the TSTART bit in the TRACR register. Count stop conditions • 0 (count stops) is written to the TSTART bit in the TRACR register. • 1 (count forcibly stops) is written to the TSTOP bit in the TRACR register. Interrupt request generation timing When timer RA underflows [timer RA interrupt]. INT1/TRAIO pin function Programmable I/O port, or INT1 interrupt input TRAO pin function Programmable I/O port Read from timer The count value can be read by reading registers TRA and TRAPRE. Write to timer • When registers TRAPRE and TRA are written while the count is stopped, values are written to both the reload register and counter. • When registers TRAPRE and TRA are written during the count, values are written to the reload register and counter (refer to 17.1.1.1 Timer Write Control during Count Operation ). Timer RA I/O Control Register Symbol Address After Reset TRAIOC 0101h 00h Bit Symbol Bit Name Function RW INT1 _____ /TRAIO select bit 0 : INT1 _____ /TRAIO pin (P1_7) 1 : INT1 _____ /TRAIO pin (P1_5) Nothing is assigned. If necessary, set to 0. When read, the content is 0. TRAO output enable bit TRAIO input filter select bits Set to 0 in timer mode. RW TRAIO polarity sw itch bit 0 Set to 0 in timer mode. TRAIO output control bit — (b7-b6) — TOPCR RW TOENA RW RW TIPF0 RW TIPF1 00 b7 b6 b5 b4 b3 b2 TIOSEL b1 b0 0 0 TEDGSEL |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |