CS42324 datasheet(60/71 Pages) CIRRUS

60 / 71 page

DS721A6

CS42324

6.19.1

DAC2 Auto Mute Left Mask (DAC2_AMUTELM)

This bit serves as a mask for the DAC2 Auto Mute Left interrupt source. If this bit is cleared, the

DAC2_AMUTEL interrupt is unmasked, meaning that if the DAC2_AMUTEL condition occurs, the INT pin

will go active according to the DAC_AMUTE[1:0] bits in the “Interrupt Mode (Address 16h)” register on

page 59. If the DAC2_AMUTELM bit is set, the DAC2_AMUTEL condition is masked, meaning that its oc-

currence will not affect the INT pin.

6.19.2

DAC2 Auto Mute Right Mask (DAC2_AMUTERM)

This bit serves as a mask for the DAC2 Auto Mute Left interrupt source. If this bit is cleared, the

DAC2_AMUTER interrupt is unmasked, meaning that if the DAC2_AMUTER condition occurs, the INT pin

will go active according to the DAC_AMUTE[1:0] bits in the “Interrupt Mode (Address 16h)” register on

page 59. If the DAC2_AMUTERM bit is set, the DAC2_AMUTER condition is masked, meaning that its

occurrence will not affect the INT pin.

6.19.3

DAC1 Auto Mute Left Mask (DAC1_AMUTELM)

This bit serves as a mask for the DAC1 Auto Mute Left interrupt source. If this bit is cleared, the

DAC1_AMUTEL interrupt is unmasked, meaning that if the DAC1_AMUTEL condition occurs, the INT pin

will go active according to the DAC_AMUTE[1:0] bits in the “Interrupt Mode (Address 16h)” register on

page 59. If the DAC1_AMUTELM bit is set, the DAC1_AMUTEL condition is masked, meaning that its oc-

currence will not affect the INT pin.

6.19.4

DAC1 Auto Mute Right Mask (DAC1_AMUTELM)

This bit serves as a mask for the DAC1 Auto Mute Left interrupt source. If this bit is cleared, the

DAC1_AMUTER interrupt is unmasked, meaning that if the DAC1_AMUTER condition occurs, the INT pin

will go active according to the DAC_AMUTE[1:0] bits in the “Interrupt Mode (Address 16h)” register on

page 59. If the DAC1_AMUTERM bit is set, the DAC1_AMUTER condition is masked, meaning that its

occurrence will not affect the INT pin.

6.19.5

Serial Port 2 Clock Error Mask (SP2_CLKERRM)

This bit serves as a mask for the serial port 2 clock error interrupt source. If this bit is cleared, the

SP2_CLKERR interrupt is unmasked, meaning that if the SP2_CLKERR bit is set, the INT pin will go ac-

tive according to the SP2_CLKERR[1:0] bits in the “Interrupt Mode (Address 16h)” register on page 59. If

the SP2_CLKERRM bit is set, the SP2_CLKERR condition is masked, meaning that its occurrence will

not affect the INT pin.

6.19.6

Serial Port 1 Clock Error Mask (SP1_CLKERRM)

This bit serves as a mask for the serial port 1 clock error interrupt source. If this bit is cleared, the

SP1_CLKERR interrupt is unmasked, meaning that if the SP1_CLKERR bit is set, the INT pin will go ac-

tive according to the SP1_CLKERR[1:0] bits in the “Interrupt Mode (Address 16h)” register on page 59. If

the SP1_CLKERRM bit is set, the SP1_CLKERR condition is masked, meaning that its occurrence will

not affect the INT pin.

CS42324 数据表(PDF) 60 Page - Cirrus Logic

CS42324 数据表(HTML) 60 Page - Cirrus Logic

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71

数据表下载

链接网址

CS42324 数据表(PDF) 60 Page - Cirrus Logic

CS42324 数据表(HTML) 60 Page - Cirrus Logic

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71

数据表 下载

链接网址

数据表下载