| 数据搜索系统,热门电子元器件搜索 |
|
ST7MC1K2-Auto 数据表(PDF) 121 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST7MC1K2-Auto 数据表(HTML) 121 Page - STMicroelectronics |
|
121 / 371 page ![]() Obsolete Product(s) - Obsolete Product(s) ST7MC1K2-Auto, ST7MC1K6-Auto, ST7MC2S4-Auto, ST7MC2S6-Auto On-chip peripherals 121/371 Control register 2 (CR2) CR2 Reset value: 0000 0000 (00h) 7 654 32 10 OC1E OC2E OPM PWM CC[1:0] IEDG2 EXEDG R/W R/W R/W R/W R/W R/W R/W Table 51. CR2 register description Bit Name Function 7 OC1E Output compare 1 pin enable This bit is used only to output the signal from the timer on the OCMP1 pin (OLV1 in output compare mode, both OLV1 and OLV2 in PWM and one-pulse mode). Whatever the value of the OC1E bit, the output compare 1 function of the timer remains active. 0: OCMP1 pin alternate function disabled (I/O pin free for general-purpose I/O) 1: OCMP1 pin alternate function enabled 60C2E Output compare 2 pin enable This bit is used only to output the signal from the timer on the OCMP2 pin (OLV2 in output compare mode). Whatever the value of the OC2E bit, the output compare 2 function of the timer remains active. 0: OCMP2 pin alternate function disabled (I/O pin free for general-purpose I/O) 1: OCMP2 pin alternate function enabled 5OPM One pulse mode 0: One pulse mode is not active 1: One pulse mode is active, the ICAP1 pin can be used to trigger one pulse on the OCMP1 pin; the active transition is given by the IEDG1 bit. The length of the generated pulse depends on the contents of the OC1R register. 4PWM Pulse width modulation 0: PWM mode is not active 1: PWM mode is active, the OCMP1 pin outputs a programmable cyclic signal; the length of the pulse depends on the value of OC1R register; the period depends on the value of OC2R register. 3:2 CC[1:0] Clock control The timer clock mode depends on the following bits: 00: Timer clock = fCPU/4 01: Timer clock = fCPU/2 10: Timer clock = fCPU/8 11: Timer clock = external clock (where available) Note: If the external clock pin is not available, programming the external clock configuration stops the counter. Obsolete Product(s) - Obsolete Product(s) |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |