| 数据搜索系统,热门电子元器件搜索 |
|
MSC8103/D 数据表(PDF) 44 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MSC8103/D 数据表(HTML) 44 Page - Freescale Semiconductor, Inc |
|
44 / 104 page ![]() MSC8103 Network Digital Signal Processor, Rev. 11 2-4 Freescale Semiconductor Physical and Electrical Specifications 2.5 Clock Configuration The following sections provide a general description of clock configuration. 2.5.1 Valid Clock Modes Table 2-6 shows the maximum frequency values for each rated core frequency (275 or 300 MHz). The user must ensure that maximum frequency values are not exceeded. Six bit values map the MSC8103 clocks to one of the valid configuration mode options. Each option determines the CLKIN , SC140, system bus, SCC clock, CPM, and CLKOUT frequencies. The six bit values are derived from three dedicated input pins (MODCK[1–3]) and three bits from the hard reset configuration word (MODCK_H). To configure the SPLL pre-division factor, SPLL multiplication factor, and the frequencies for the SC140, SCC clocks, CPM parallel I/O ports, and system buses, the MODCK[1–3] pins are sampled and combined with the MODCK_H values when the internal power-on reset (internal PORESET) is deasserted. Clock configuration changes only when the internal PORESET signal is deasserted. The following factors are configured: • SPLL pre-division factor (SPLL PDF) • SPLL multiplication factor (SPLL MF) • Bus post-division factor (Bus DF) • CPM division factor (CPM DF) • Core division factor (Core DF) • CPLL pre-division factor (CPLL PDF) • CPLL multiplication factor (CPLL MF) The SCC division factor (SCC DF) is fixed at 4. The BRG division factor (BRG DF) is configured through the System Clock Control Register (SCCR) and can be 4, 16 (default after reset), 64, or 256. Note: Refer to Clock Mode Selection for MSC8101 and MSC8103 Mask Set 2K87M (AN2306) for details on clock configuration. 2.5.2 Clocks Programming Model This section describes the clock registers in detail. The registers discussed are as follows: • System Clock Control Register (SCCR) • System Clock Mode Register (SCMR) Table 2-6. Maximum Frequencies Characteristic Maximum Frequency in MHz Core Frequency 275 300 CPM Frequency (CPMCLK) 183.33 200 Bus Frequency (BCLK) 91.67 100 Serial Communication Controller Clock Frequency (SCLK) 91.67 100 Baud Rate Generator Clock Frequency (BRGCLK) 91.67 100 External Clock Output Frequency (CLKOUT) 91.67 100 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |