ADE5166 datasheet(138/156 Pages) AD

138 / 156 page

ADE5166/ADE5169/ADE5566/ADE5569

Rev. B | Page 138 of 156

SERIAL PERIPHERAL INTERFACE (SPI)

The ADE5166/ADE5169/ADE5566/ADE5569 integrate a complete

hardware serial peripheral interface on chip. The SPI is full duplex

so that eight bits of data are synchronously transmitted and simul-

taneously received. This SPI implementation is double buffered,

allowing users to read the last byte of received data while a new

byte is shifted in. The next byte to be transmitted can be loaded

while the current byte is shifted out.

The SPI port can be configured for master or slave operation.

The physical interface to the SPI is via the MISO (P0.5/MISO/ZX),

MOSI (P0.4/MOSI/SDATA), SCLK (P0.6/SCLK/T0), and SS

(P0.7/SS/T1/RxD2) pins, while the firmware interface is via the

SFRs listed in

Table 150

Note that the SPI pins are shared with the I2C pins. Therefore, the

user can enable only one interface at a time. The SCPS bit in the

configuration SFR (CFG, Address 0xAF[5]) selects which peri-

pheral is active.

SPI REGISTERS

Table 150. SPI SFR List

SFR Address

Mnemonic

R/W

Length (Bits)

Default

Description

0x9A

SPI2CTx

SPI/I2C transmit buffer (see Table 151).

0x9B

SPI2CRx

SPI/I2C receive buffer (see Table 152).

0xE8

SPIMOD1

R/W

0x10

SPI Configuration SFR 1 (see Table 153).

0xE9

SPIMOD2

R/W

SPI Configuration SFR 2 (see Table 154).

0xEA

SPISTAT

R/W

SPI interrupt status (see Table 155).

Table 151. SPI/I2C Transmit Buffer SFR (SPI2CTx, Address 0x9A)

Bit

Mnemonic

Default

Description

[7:0]

SPI2CTx

SPI or I2C transmit buffer. When the SPI2CTx SFR is written, its content is transferred to the transmit

FIFO input. When a write is requested, the FIFO output is sent on the SPI or I2C bus.

Table 152. SPI/I2C Receive Buffer SFR (SPI2CRx, Address 0x9B)

Bit

Mnemonic

Default

Description

[7:0]

SPI2CRx

SPI or I2C receive buffer. When the SPI2CRx SFR is read, one byte from the receive FIFO output is

transferred to the SPI2CRx SFR. A new data byte from the SPI or I2C bus is written to the FIFO input.

ADE5166 数据表(PDF) 138 Page - Analog Devices

ADE5166 数据表(HTML) 138 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

ADE5166 数据表(PDF) 138 Page - Analog Devices

ADE5166 数据表(HTML) 138 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载