| 数据搜索系统,热门电子元器件搜索 |
|
PC87366 数据表(PDF) 67 Page - National Semiconductor (TI) |
|
|
|
|||||||||||||||||||||||||||||
PC87366 数据表(HTML) 67 Page - National Semiconductor (TI) |
|
67 / 240 page ![]() 2.0 Device Architecture and Configuration (Continued) 67 www.national.com 2.15 GENERAL-PURPOSE INPUT/OUTPUT (GPIO) PORTS CONFIGURATION 2.15.1 General Description The GPIO functional block includes 29 pins, arranged in three 8-bit ports (ports 0, 1 and 2) and one 5-bit port (port 3). All pins in port 0 are I/O, and have full event detection capability, enabling them to trigger the assertion of IRQ, SMI and PWUREQ signals. With the exception of bit 5 which is output only, port 1 pins are also I/O with full event detection capability. Pins in ports 2 and 3 are I/O, but none of them has event detection capability. The sixteen runtime registers associated with the five ports are arranged in the GPIO address space as shown in Table 27. The GPIO base address is 16-byte aligned. Address bits 3-0 are used to indicate the register offset. Table 27. Runtime Registers in GPIO Address Space 2.15.2 Implementation The standard GPIO port with event detection capability (such as ports 0, 1 and 4) has four runtime registers. Each pin is associated with a GPIO Pin Configuration register that includes seven configuration bits. Ports 2 and 3 are non-standard ports that do not support event detection, and therefore differ from the generic model as follows: q They each have two runtime registers for basic functionality: GPDO2/3 and GPDI2/3. Event detection registers GPEVEN2/3 and GPEVST2/3 are not available. q Only bits 3-0 are implemented in the GPIO Pin Configuration registers of ports 2 and 3. Bits 6-4, associated with the event detection functionality, are reserved. Offset Mnemonic Register Name Port Type 00h GPDO0 GPIO Data Out 0 0 R/W 01h GPDI0 GPIO Data In 0 RO 02h GPEVEN0 GPIO Event Enable 0 R/W 03h GPEVST0 GPIO Event Status 0 R/W1C 04h GPDO1 GPIO Data Out 1 1 R/W 05h GPDI1 GPIO Data In 1 RO 06h GPEVEN1 GPIO Event Enable 1 R/W 07h GPEVST1 GPIO Event Status 1 R/W1C 08h GPDO2 Data Out 2 2 R/W 09h GPDI2 Data In 2 RO 0Ah GPDO3 Data Out 3 3 R/W 0Bh GPDI3 Data In 3 RO |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |