LPC802 datasheet(40/83 Pages) NXP

40 / 83 page

LPC802

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 1.6 — 27 April 2018

40 of 83

NXP Semiconductors

LPC802

32-bit ARM Cortex-M0+ microcontroller

12. Static characteristics

12.1 General operating conditions

[1]

Typical ratings are not guaranteed. The values listed are for room temperature (25

C), nominal supply voltages.

[2]

Including bonding pad capacitance. Based on simulation, not tested in production.

12.2 Power consumption

Power measurements in active, sleep, deep-sleep, and power-down modes were

performed under the following conditions:

• Configure all pins as GPIO with pull-up resistor disabled in the IOCON block.

• Configure GPIO pins as outputs using the GPIO DIR register.

• Write 1 to the GPIO CLR register to drive the outputs LOW.

Table 11.

General operating conditions

Tamb = 40 C to +105 C, unless otherwise specified.

Symbol

Parameter

Conditions

Min

Typ[1]

Max

Unit

fclk

clock frequency

internal CPU/system clock

MHz

VDD

supply voltage (core

and external rail)

1.71

3.6

For ADC operations

2.5

3.6

VDDIO

I/O rail

1.71

3.6

For ADC operations

2.5

3.6

Vref

ADC positive reference

voltage

on pin VREFP

2.5

VDD

Pin capacitance

Cio

input/output

capacitance

pins with analog and digital

functions

[2] --

7.1

pins with digital functions only

[2] --

2.8

LPC802 数据表(PDF) 40 Page - NXP Semiconductors

LPC802 数据表(HTML) 40 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83

数据表下载