HD64F2149YV datasheet(195/1075 Pages) RENESAS

195 / 1075 page

Section 7 Data Transfer Controller

Rev. 3.00 Jan 18, 2006 page 167 of 1044

REJ09B0280-0300

Section 7 Data Transfer Controller

7.1

Overview

The H8S/2169 or H8S/2149 includes a data transfer controller (DTC). The DTC can be activated

by an interrupt or software, to transfer data.

7.1.1

Features

• Transfer possible over any number of channels

 Transfer information is stored in memory

 One activation source can trigger a number of data transfers (chain transfer)

• Wide range of transfer modes

 Normal, repeat, and block transfer modes available

 Incrementing, decrementing, and fixing of transfer source and destination addresses can be

selected

• Direct specification of 16-Mbyte address space possible

 24-bit transfer source and destination addresses can be specified

• Transfer can be set in byte or word units

• A CPU interrupt can be requested for the interrupt that activated the DTC

 An interrupt request can be issued to the CPU after one data transfer ends

 An interrupt request can be issued to the CPU after all specified data transfers have ended

• Activation by software is possible

• Module stop mode can be set

 The initial setting enables DTC registers to be accessed. DTC operation is halted by setting

module stop mode

HD64F2149YV 数据表(PDF) 195 Page - Renesas Technology Corp