| 数据搜索系统,热门电子元器件搜索 |
|
RM0352 数据表(PDF) 79 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
RM0352 数据表(HTML) 79 Page - STMicroelectronics |
|
79 / 138 page ![]() DocID024647 Rev 1 79/138 RM0352 I2C bus interface 137 10.2.4 I2C transmit FIFO register (I2C_TFR) Table 74. I2C transmit FIFO register (I2C_TFR) Address: I2CBaseAddress + 0x10 Type: W Reset: 0x00000000 [10:8] EA10: extended address. Includes the extension (MSB bits) of the field A7 used to initiate the current transaction.Valid only when the addressing mode is set to 10 bits (AM = 10) [7:1] A7: Address. Includes the 7-bit address or the LSB bits of the10-bit address used to initiate the current transaction. [0] OP: operation 0: indicates a master write operation 1: indicates a master read operation I2C transmit FIFO register (I2C_TFR) 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 RESERVED TDATA RW Description: I 2 C transmit FIFO register TDATA: transmission data. TDATA contains the payload related to a master write or read- from-slave operation to be written in the Tx FIFO. The TDATA(0) is the first LSB bit transmitted over the I 2 C line. In case of master write operation, the Tx FIFO shall be preloaded otherwise the I 2 C controller cannot start the operation until data are available. [7:0] In case of read-from-slave operation, when the slave is addressed, the interrupt I2C_RISR:RFSR bit is asserted and the CPU shall download the data in the FIFO. If the FIFO is empty and the I 2 C master is still requiring data, a new request (I2C_RISR: RFSE interrupt bit) is asserted to require additional data to the CPU. The slave controller stretches the I 2 C clock line when no data are available for transmission. Since the Tx FIFO could contain some pending data related to the previous transfer (the transfer length may be unknown to the slave controller), the Tx FIFO is self-flushed before to assert the I2C_RISR:RFSR bit. On the completion of the read-from-slave operation the interrupt bit I2C_RISR:STD is asserted and the related status of the operation is stored in the I2C_SR register. In CPU mode the FIFO management shall be based on the assertion of the interrupt bit I2C_RISR:TXFNE, related to the nearly-empty threshold. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |