RM0352 datasheet(47/138 Pages) STMICROELECTRONICS

47 / 138 page

DocID024647 Rev 1

47/138

RM0352

ARM© dual timer module (SP804)

137

ARM© dual timer module (SP804)

This section is intended for hardware and software engineers implementing “System-on-

Chip” (SoC) designs.

The SP804 timer is an IP provided by ARM (SP804). Additional details about its functional

blocks may be found in

“ARM Dual-Timer module (SP804) Technical Reference Manual”.

8.1

Introduction

This section introduces the dual timer module (SP804). It contains the following parts:

•

About the ARM dual timer module (SP804)

•

Features

•

Programmable parameters

8.1.1

About the ARM dual timer module (SP804)

The ARM dual timer module is an “Advanced Microcontroller Bus Architecture” (AMBA)

compliant system-on-chip (SoC) peripheral developed, tested and licensed by ARM Limited.

The module is an AMBA slave module and connects to the “Advanced Peripheral Bus”

(APB). The dual timer module consists of two programmable 32/16-bit down counters that

can generate interrupts on reaching zero.

8.1.2

Features

The features of the dual timer module are:

•

Compliance to the AMBA Specification (Rev 2.0) for easy integration into SoC

implementation.

•

Two 32/16-bit down counters with free running, periodic and one-shot modes.

•

Common clock with separate clock-enables for each timer gives flexible control of the

timer intervals.

•

Interrupt output generation on timer count reaching zero.

•

Identification registers that uniquely identify the dual timer module. These can be used

by software to automatically configure itself.

RM0352 数据表(PDF) 47 Page - STMicroelectronics

RM0352 数据表(HTML) 47 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载