| 数据搜索系统,热门电子元器件搜索 |
|
LTM4686BIVPBF 数据表(PDF) 4 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
LTM4686BIVPBF 数据表(HTML) 4 Page - Analog Devices |
|
4 / 130 page ![]() LTM4686B 4 Rev. 0 For more information www.analog.com ELECTRICAL CHARACTERISTICS The l denotes the specifications which apply over the specified internal operating temperature range (Note 2). Specified as each individual output channel (Note 4). TA = 25°C, VIN = 5V, RUNn = 5V, FREQUENCY_SWITCH = 1MHz, VOUT_COMMANDn = 1V and VOUT_UV_FAULT_RESPONSEn = TON_MAX_FAULT_RESPONSEn = 0x00 unless otherwise noted. All other command codes configured per factory-default EEPROM settings unless otherwise noted. Tested per Circuit 1, unless otherwise noted. SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS VIN Input DC Voltage Test Circuit 1; 4.5V ≤ SVIN ≤ 5.75V; INTVCC = SVIN; VIN_OFF < VIN_ON = 4.25V Test Circuit 2; 4.5V ≤ SVIN ≤ 5.75V; INTVCC = SVIN; VIN_OFF < VIN_ON = 4.25V l l 4.5 2.375 5.75 5.75 V V VOUTn Range of Output Voltage Regulation VOUT0 Differentially Sensed on VOSNS0+/VOSNS0– Pin-Pair; VOUT1 Differentially Sensed on VOSNS1/SGND Pin-Pair; Commanded by Serial Bus or with Resistors Present at Start-Up on VOUTnCFG and/or VTRIMnCFG l l 0.5 0.5 3.6 3.6 V V VOUTn(DC) Output Voltage, Total Variation with Line and Load (Note 5) VOUTn Low Range (MFR_PWM_MODEn[1] = 1b), Digital Servo Engaged (MFR_PWM_MODEn[6] = 1b) Digital Servo Disengaged (MFR_PWM_MODEn[6] = 0b) l 0.995 0.985 1.000 1.000 1.005 1.015 V V Input Specifications IINRUSH(VIN) Input Inrush Current at Start-Up Test Circuit 1, VOUTn =1V, VIN = 5V; No Load Besides Capacitors; TON_RISEn = 3ms 400 mA IQ(SVIN) Input Supply Bias Current Forced Continuous Mode, MFR_PWM_MODEn[0] = 1b RUNn = 5V, RUN[1–n] = 0V, INTVCC = 5V Shutdown, RUN0 = RUN1 = 0V, INTVCC Open Circuit 1.2 20 mA mA IS(VINn,PSM) Input Supply Current in Pulse-Skipping Mode Operation Pulse-Skipping Mode, MFR_PWM_MODEn[0] = 0b, IOUTn = 100mA 45 mA IS(VINn,FCM) Input Supply Current in Forced-Continuous Mode Operation Forced Continuous Mode, MFR_PWM_MODEn[0] = 1b IOUTn = 100mA IOUTn = 14A 120 4 mA A IS(VINn,SHUTDOWN) Input Supply Current in Shutdown Shutdown, RUNn = 0V 80 µA Output Specifications IOUTn Output Continuous Current Range (Note 6) 0 14 A ∆VOUTn(LINE) VOUTn Line Regulation Accuracy Digital Servo Engaged (MFR_PWM_MODEn[6] = 1b, Note 12) Digital Servo Disengaged (MFR_PWM_MODEn[6] = 0b) SVIN and VINn and INTVCC Electrically Shorted Together; IOUTn = 0A, 4.5V ≤ VIN ≤ 5.75V, VOUT Low Range (MFR_PWM_MODEn[1] = 1b) FREQUENCY_SWITCH = 1MHz (Referenced to 5VIN) (Note 5) l 0.03 0.03 ±0.2 % %/V ∆VOUTn(LOAD) VOUTn Load Regulation Accuracy Digital Servo Engaged (MFR_PWM_MODEn[6] = 1b, Note 12) Digital Servo Disengaged (MFR_PWM_MODEn[6] = 0b) 0A ≤ IOUTn ≤ 14A, VOUT Low Range, (MFR_PWM_MODEn[1] = 1b) FREQUENCY_SWITCH = 1MHz (Note 5) l 0.03 0.2 0.5 % % VOUTn(AC) Output Voltage Ripple (Note 12) 10 mVP-P fS (Each Channel) VOUTn Ripple Frequency FREQUENCY_SWITCH Set to 1MHz (0x03E8) l 950 1000 1050 kHz ∆VOUTn(START) Turn-On Overshoot TON_RISEn = 2ms (Note 12) 8 mV tSTART Turn-On Start-Up Time Time from VIN Toggling from 0V to 5VIN to Rising Edge of GPIOn. TON_DELAYn = 0ms, TON_RISEn = 2ms, MFR_GPIO_PROPAGATEn = 0x0100, MFR_GPIO_RESPONSEn = 0x0000 l 34 39 ms tDELAY(0ms) Turn-On Delay Time Time from First Rising Edge of RUNn to Rising Edge of GPIOn. TON_DELAYn = 0ms, TON_RISEn = 3ms, MFR_GPIO_PROPAGATEn = 0x0100, MFR_GPIO_RESPONSEn = 0x0000. VIN Having Been Established for at Least 39ms l 2.7 3.1 3.5 ms |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |