| 数据搜索系统,热门电子元器件搜索 |
|
HD64F2149YV 数据表(PDF) 112 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
HD64F2149YV 数据表(HTML) 112 Page - Renesas Technology Corp |
|
112 / 1075 page ![]() Section 3 MCU Operating Modes Rev. 3.00 Jan 18, 2006 page 84 of 1044 REJ09B0280-0300 3.2.4 Serial Timer Control Register (STCR) 7 IICS 0 R/W 6 IICX1 0 R/W 5 IICX0 0 R/W 4 IICE 0 R/W 3 FLSHE 0 R/W 0 ICKS0 0 R/W 2 — 0 R/W 1 ICKS1 0 R/W Bit Initial value Read/Write STCR is an 8-bit readable/writable register that controls register access, the IIC operating mode (when the on-chip IIC option is included), an on-chip flash memory control, and also selects the TCNT input clock. For details of functions other than register access control, see the descriptions of the relevant modules. If a module controlled by STCR is not used, do not write 1 to the corresponding bit. STCR is initialized to H'00 by a reset and in hardware standby mode. Bits 7 to 5—I 2C Control (IICS, IICX1, IICX0): These bits control the operation of the I2C bus interface and others when the on-chip IIC option is included. For details, see section 16, I 2C Bus Interface. Bit 4—I 2C Master Enable (IICE): Controls CPU access to the I2C bus interface data registers and control registers (ICCR, ICSR, ICDR/SARX, and ICMR/SAR), the PWMX data registers and control registers (DADRAH/DACR, DADRAL, DADRBH/DACNTH, and DADRBL/DACNTL), and the SCI control registers (SMR, BRR, and SCMR). Bit 4 IICE Description 0 Addresses H'(FF)FF88 and H'(FF)FF89, and H'(FF)FF8E and H'(FF)FF8F, are used for SCI1 control register access Addresses H'(FF)FFA0 and H'(FF)FFA1, and H'(FF)FFA6 and H'(FF)FFA7, are used for SCI2 control register access Addresses H'(FF)FFD8 and H'(FF)FFD9, and H'(FF)FFDE and H'(FF)FFDF, are used for SCI0 control register access (Initial value) 1 Addresses H'(FF)FF88 and H'(FF)FF89, and H'(FF)FF8E and H'(FF)FF8F, are used for IIC1 data register and control register access Addresses H'(FF)FFA0 and H'(FF)FFA1, and H'(FF)FFA6 and H'(FF)FFA7, are used for PWMX data register and control register access Addresses H'(FF)FFD8 and H'(FF)FFD9, and H'(FF)FFDE and H'(FF)FFDF, are used for IIC0 data register and control register access |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |