JS28F256P33BFE datasheet(45/90 Pages) MICRON

45 / 90 page

Datasheet

Aug 2009

Order Number:320003-08

P33-65nm

13.0

Maximum Ratings and Operating Conditions

13.1

Absolute Maximum Ratings

Warning:

Stressing the device beyond the Absolute Maximum Ratings may cause permanent

damage. These are stress ratings only.

13.2

Operating Conditions

Note:

Operation beyond the Operating Conditions is not recommended and extended

exposure beyond the Operating Conditions may affect device reliability.

Table 17: Absolute Maximum Ratings

Parameter

Maximum Rating

Notes

Temperature under bias

–40 °C to +85 °C

Storage temperature

–65 °C to +125 °C

Voltage on any signal (except VCC, VPP and VCCQ)

–0.5 V to +4.1 V

VPP voltage

–0.2 V to +10 V

1,2,3

VCC voltage

–0.2 V to +4.1 V

VCCQ voltage

–0.2 V to +4.1 V

Output short circuit current

100 mA

Notes:

Voltages shown are specified with respect to VSS. Minimum DC voltage is –0.5 V on input/output signals and –0.2 V on

VCC, VCCQ, and VPP. During transitions, this level may undershoot to –2.0 V for periods less than 20 ns. Maximum DC

voltage on VCC is VCC + 0.5 V, which, during transitions, may overshoot to VCC + 2.0 V for periods less than 20 ns.

Maximum DC voltage on input/output signals and VCCQ is VCCQ + 0.5 V, which, during transitions, may overshoot to

VCCQ + 2.0 V for periods less than 20 ns.

Maximum DC voltage on VPP may overshoot to +11.5 V for periods less than 20 ns.

Program/erase voltage is typically 2.3 V – 3.6 V. 9.0 V can be applied for 80 hours maximum total, to any blocks for

1000 cycles maximum. 9.0 V program/erase voltage may reduce block cycling capability.

Output shorted for no more than one second. No more than one output shorted at a time.

Table 18: Operating Conditions

Symbol

Parameter

Min

Max

Units

Notes

Operating Temperature

–40

+85

°C

VCC

VCC Supply Voltage

2.3

3.6

VCCQ

I/O Supply Voltage

CMOS inputs

2.3

3.6

TTL inputs

2.4

3.6

VPPL

VPP Voltage Supply (Logic Level)

1.5

3.6

VPPH

Buffered Enhanced Factory Programming VPP

8.5

9.5

tPPH

Maximum VPP Hours

VPP = VPPH

Hours

Block

Erase

Cycles

Main and Parameter Blocks

VPP = VPPL

100,000

Cycles

Main Blocks

VPP = VPPH

100,000

Parameter Blocks

VPP = VPPH

100,000

Notes:

TC = Case Temperature.

In typical operation VPP program voltage is VPPL.

JS28F256P33BFE 数据表(PDF) 45 Page - Micron Technology

JS28F256P33BFE 数据表(HTML) 45 Page - Micron Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90

数据表下载

链接网址

JS28F256P33BFE 数据表(PDF) 45 Page - Micron Technology

JS28F256P33BFE 数据表(HTML) 45 Page - Micron Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90

数据表 下载

链接网址

数据表下载