| 数据搜索系统,热门电子元器件搜索 |
|
TNETX15VE 数据表(PDF) 29 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
TNETX15VE 数据表(HTML) 29 Page - Texas Instruments |
|
29 / 113 page ![]() TNETX15VE VLAN-ENGINE ADDRESS-LOOKUP DEVICE SPWS028B – APRIL 1997 – REVISED SEPTEMBER 1997 29 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 lookup routing-code register, findport at 0x12–0x13 (DIO) (continued) If findnode is a multicast address, findnode (40) = 1 (bit 40 of the Ethernet address is 1): BYTE 3 BYTE 2 BIT 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 NBLCK PORTFLAG Initial Values After Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 BIT NAME FUNCTION 15 NBLCK Not blocked indication. NBLCK overrides the RXblock register. • If NBLCK is 1, frames destined to this node are forwarded even if the corresponding RXblock bit for the port that originated the frame is set. • If NBLCK is 0, frames are forwarded only if the RXblock bit for the port that originated the frame is not set. 14–0 PORTFLAG Port-bit vector for multicast. PORTFLAG shows the port-bit vector for the multicast address contained in the findnode register. The bit values in this field correspond one-to-one with the TNETX3150/TNETX3150A port assignment. If the FIND operation used the NBFR bit, findport is defined: The findport register returns the following information when performing NBFR operations (reading the RX FIFO for frames whose destination address is tagged by the NBLCK bit). BYTE 3 BYTE 2 BIT 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 TAG PORT CODE Reserved Initial Values After Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 BIT NAME FUNCTION 15–12 TAG Frame’s tag field. TAG shows the frame’s tag for the frame shown in the findnode register as decoded from the DRAM bus. The TAG field is used by the TNETX15VE to determine the VLAN for a frame coming from port 00. 11–8 PORT CODE Port code for source address. PORT CODE shows the source port for the frame coming from the address in the findnode register. 7–0 Reserved Writes to this location are ignored and are read as 0. node’s age-stamp register, findnodeage at 0x14–0x15 (DIO) BYTE 1 BYTE 0 BIT 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 NODEAGE Initial Values After Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The findnodeage register is a read-only register, which holds the current 16-bit age-time stamp of the address contained in the findnode register and findVLANID register after a FIND operation. Age units are seconds. The time stamp indicates when this address was last seen. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |