| 数据搜索系统,热门电子元器件搜索 |
|
VSC8540RT 数据表(PDF) 60 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
VSC8540RT 数据表(HTML) 60 Page - Microchip Technology |
|
60 / 87 page ![]() VSC8540RT DS60001603E-page 60 2022 Microchip Technology Inc. and its subsidiaries 6.5.5 ENHANCED LED CONTROL Register 25G in the extended register space controls the advanced functionality of the parallel LED signals. 6.6 Clause 45 Registers to Support Energy-Efficient Ethernet and 802.3bf This section describes the Clause 45 registers that are required to support energy-efficient Ethernet. Access to these registers is through the IEEE standard registers 13 and 14 (MMD access control and MMD data or address registers). The following table lists the addresses and register names in the Clause 45 register page space. When the link is down, 0 is the value returned for the x.180x addresses. 5:4 Clock squelch level R/W Select clock squelch level. 00: Automatically squelch clock to low when the link is not up, is unstable, is up in a mode that does not support the genera- tion of a recovered clock (10BASE-T), or is up in EEE mode (100BASE-TX ). 01: Same as 00 except that the clock is also generated in 10BASE-T link-up mode. This mode also generates a recov- ered clock output in EEE mode during reception of LP_IDLE. 10: Squelch only when the link is not up. 11: Disable clock squelch. Note: A clock from the Cu PHY will be output on the recov- ered clock output in this mode when the link is down. When the CLK_SQUELCH_IN pin is set high, it squelches the recovered clocks regardless of bit settings. 00 3 Reserved RO Reserved. 2:0 Clock selection R/W 000: Reserved. 001: Copper PHY recovered clock. 010–111: Reserved. 000 TABLE 6-53: ENHANCED LED CONTROL, ADDRESS 25G (0X19) Bit Name Access Description Default 15:8 LED pulsing duty cycle control R/W Programmable control for LED pulsing duty cycle when bit 30.12 is set to 1. Valid settings are between 0 and 198. A setting of 0 corresponds to a 0.5% duty cycle and 198 corresponds to a 99.5% duty cycle. Intermediate values change the duty cycle in 0.5% increments. 0x00 7:0 Reserved RO Reserved. TABLE 6-54: CLAUSE 45 REGISTERS PAGE SPACE Address Name 1.1 PMA/PMD status 1 1.1800 PMA/PMD time sync capable 1.1801 PMA/PMD delay Tx max. 1.1803 PMA/PMD delay Tx min. 1.1805 PMA/PMD delay Rx max. 1.1807 PMA/PMD delay Rx min. 3.1 PCS status 1 3.20 EEE capability 3.22 EEE wake error counter TABLE 6-52: RECOVERED CLOCK CONTROL, ADDRESS 23G (0X17) (CONTINUED) Bit Name Access Description Default |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |