| 数据搜索系统,热门电子元器件搜索 |
|
SIO1007 数据表(PDF) 71 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
SIO1007 数据表(HTML) 71 Page - Microchip Technology |
|
71 / 108 page ![]() 2005 - 2015 Microchip Technology Inc. DS00002020A-page 71 SIO1007 18.4.29 CR1E CR1E can only be accessed in the configuration state and after the CSR has been initialized to 1EH. CR1E is used to set the SCE (FIR) base address - High Byte ADR[15:11]. The SCE (FIR) logical device base address is initialized using the base address bits located in two configuration regis- ters: CR2B-low byte and CR1E-high byte. The SCE base address can be set to 8160 locations on 8-byte boundaries from 0000H - FFF8H. The SCE (FIR) base address bits A[2:0] are decoded as 000b. The SCE (FIR) block uses full 16-bit addressing decod- ing. An address matching the SCE (FIR) base address bits A[15:3] is decoded using the specific address bits A[2:0] to target registers in SCE (FIR). When the SCE (FIR) logical device activate bit in CR3A-bit0 is cleared to 0, no address decoding takes place for the SCE (FIR) logical device. 18.4.30 CR1F CR1F can only be accessed in the configuration state and after the CSR has been initialized to 1Fh. CR1F is used to select the low byte of the base address (ADR[9:3] bits of CIrCC2 Logical Device. The CIRCC2 logical device base address is initialized using the base address bits located in two configuration registers: CR1F-low byte and CR20-high byte. The CIRCC2 base address can be set to 8,192 locations on 8-byte boundaries from 0000H - FFF8H. The CIRCC2 base address bits A[2:0] are decoded as 000b. The CIRCC2 block uses full 16-bit addressing decoding. An address matching the CIRCC2 base address bits A[15:3] is decoded using the specific address bits A[2:0] to target registers in CIRCC2. TABLE 18-24: CR1D Test 5 Type: R/W Default: 0x00 on VCC POR BIT NO. BIT NAME DESCRIPTION 0 Test 32 RESERVED FOR MICROCHIP USE 1 Test 33 2 Test 34 3 Test 35 4 Test 36 5 Test 37 6 Test 38 7 Test 39 TABLE 18-25: CR1E SCE (FIR) Base Address Register - High Byte Type: R/W Default: 0x00 on VCC POR BIT NO. BIT NAME DESCRIPTION 0 ADR11 FIR Base Address bits for decoder. 1 ADR12 2 ADR13 3 ADR14 4 ADR15 5 RESERVED Reads return 0. Writes have no effect. 6 RESERVED Reads return 0. Writes have no effect. 7 RESERVED Reads return 0. Writes have no effect. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |