H8SSLASH2214 datasheet(177/936 Pages) RENESAS

177 / 936 page

Section 5 Interrupt Controller

Rev.4.00 Sep. 18, 2008 Page 117 of 872

REJ09B0189-0400

5.6.3

Operation

The interrupt controller has three main functions in DTC and DMAC control.

(1) Selection of Interrupt Source

DMAC inputs activation factor directly to each channel. The activation factors for each channel of

DMAC are selected by DTF3 to DTF0 bits of DMACR. The DTA bit of DMABCR can be used to

select whether the selected activation factors are managed by DMAC. By setting the DTA bit to 1,

the interrupt factor which were the activation factor for that DMAC do not act as the DTC

activation factor or the CPU interrupt factor.

Interrupt factors other than the interrupts managed by the DMAC are selected as DTC activation

request or CPU interrupt request by the DTCE bit of the DTCEA to DTCEG of DTC.

By specifying the DISEL bit of the DTC's MRB, it is possible to clear the DTCE bit to 0 after

DTC data transfer, and request a CPU interrupt.

If DTC carries out the designate number of data transfers and the transfer counter reads 0, after

DTC data transfer, the DTCE bit is also cleared to 0, and a CPU interrupt requested.

(2) Determination of Priority

The DTC activation source is selected in accordance with the default priority order, and is not

affected by mask or priority levels. See section 8.4, Interrupts, and section 8.3.3, DTC Vector

Table for the respective priority.

(3) Operation Order

If the same interrupt is selected as a DTC activation source and a CPU interrupt source, the DTC

data transfer is performed first, followed by CPU interrupt exception handling.

If the same interrupt is selected as the DMAC activation factor and as the DTC activation factor or

CPU interrupt factor, these operate independently. They operate in accordance with the respective

operating states and bus priorities.

Table 5.11 shows the interrupt factor clear control and selection of interrupt factors by

specification of the DTA bit of DMAC's DMABCR, DTCE bits of DTC's DTCEA to DTCEG,

and the DISEL bit of DTC's MRB.

H8S/2214 数据表(PDF) 177 Page - Renesas Technology Corp