| 数据搜索系统,热门电子元器件搜索 |
|
MCIMX503CVM8B 数据表(PDF) 24 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MCIMX503CVM8B 数据表(HTML) 24 Page - Freescale Semiconductor, Inc |
|
24 / 134 page ![]() i.MX50 Applications Processors for Consumer Products, Rev. 2 24 Freescale Semiconductor Electrical Characteristics 4.1.3 Operating Ranges Table 11 provides the operating ranges of the i.MX50 processor. 3 Per JEDEC JESD51-6 with the board horizontal. 4 Thermal resistance between the die and the printed circuit board per JEDEC JESD51-8. Board temperature is measured on the top surface of the board near the package. 5 Thermal resistance between the die and the case top surface as measured by using the cold plate method (MIL SPEC-883 Method 1012.1). 6 Thermal characterization parameter indicating the temperature difference between the package top and the junction temperature per JEDEC JESD51-2. When Greek letters are not available, the thermal characterization parameter is written as Psi-JT. Table 11. i.MX50 Operating Ranges Symbol Parameter Minimum1 Nominal2 Maximum1 Unit VDDGP ARM core supply voltage 400 < f ARM ≤ 800 MHz 0.95 1.05 1.15 V ARM core supply voltage 167 < f ARM ≤ 400 MHz 0.85 0.95 1.15 V ARM core supply voltage 24 ≤ f ARM ≤ 167 MHz 0.8 0.9 1.15 V ARM core supply voltage Stop mode 0.75 0.85 1.15 V VCC Peripheral supply voltage low performance mode (LPM). The DDR clock rate is 24 MHz. 0.9 0.95 1.275 V Peripheral supply voltage reduced performance mode (RPM). The DDR clock rate is 100 MHz. 13 1.05 1.275 V Peripheral supply voltage high performance mode (HPM). The clock frequencies are derived from AHB bus using 133 MHz and AXI bus using 266 MHz (as needed). The DDR clock rate is 200 MHz. 1.175 1.225 1.275 V VDDA/VDDAL1 Memory arrays voltage—Run mode 1.15 1.20 1.275 V Memory arrays voltage—Stop mode 0.93 0.95 1.275 V VDD3P0 Bandgap and 480 MHz PLL supply 2.7 3.0 3.3 V VDD2P5 Efuse, 24 MHz oscillator, 32 kHz oscillator mux supply 2.375 2.5 2.625 V VDD1P2 PLL digital supplies 1.15 1.2 1.32 V VDD1P8 PLL analog supplies 1.75 1.8 1.95 V NVCC_JTAG GPIO digital power supplies 1.65 1.875 or 2.775 3.1 V NVCC_EMI_DRAM DDR supply DDR2/LPDDR1 range 1.71 1.8 1.95 V DDR supply LPDDR2 range 1.14 1.2 1.3 V |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |