| 数据搜索系统,热门电子元器件搜索 |
|
M32C/8B 数据表(PDF) 100 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M32C/8B 数据表(HTML) 100 Page - Renesas Technology Corp |
|
100 / 406 page ![]() Under development M32C/8B Group 9. Clock Generation Circuits Preliminary specification Specifications in this manual are tentative and subject to change. REJ09B0450-0050 Rev.0.50 Oct 31, 2008 Page 83 of 385 9.5 Power Consumption Control The power consumption control is enabled by controlling a CPU clock frequency. The higher the CPU clock frequency is, the more the processing power is available. The lower the CPU clock frequency is, the less power is consumed. When unnecessary oscillation circuits are stopped, power consumption is further reduced. CPU operating mode, wait mode, and stop mode are provided as the power consumption control. CPU operating mode is further separated into the following modes; main clock mode, PLL mode, low-speed mode, low-power consumption mode, on-chip oscillator mode, and on-chip oscillator low-power consumption mode. Figure 9.15 shows a mode transition diagram. Figure 9.15 Mode Transition 9.5.1 CPU operating mode The CPU clock can be selected from the main clock, sub clock, on-chip oscillator clock, or PLL clock. When switching the CPU clock source, wait until the new CPU clock source stabilizes. To change the CPU clock source from the sub clock, on-chip oscillator clock, or PLL clock, set it to the main clock once and then switch it to another clock. To switch the CPU clock source from the on-chip oscillator clock to the main clock, set bits MCD4 to MCD0 in the MCD register to 01000b (divided-by-8 mode) in on-chip oscillator mode. Table 9.6 lists bit setting and operation mode associated with clocks. Stop mode Reset Sub clock On-chip oscillator clock PLL clock CM10 = 1 Interrupt WA IT ins tru ctio n Int err up t (note 1) CM10: bit in the CM1 register NOTE: 1. Bits MCD4 to MCD0 in the MCD register become 01000b (divide-by-8 mode) after reset. Main clock mode Wait mode WAIT instructio n Interrup t Low-power consumption mode Low-speed mode On-chip oscillator mode On-chip oscillator low-power consumption mode PLL mode WAIT instruction Interrupt |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |