| 数据搜索系统,热门电子元器件搜索 |
|
IA188EM-PQF100I-R 数据表(PDF) 12 Page - InnovASIC, Inc |
|
|
|||||||||||||||||||||||||||||
IA188EM-PQF100I-R 数据表(HTML) 12 Page - InnovASIC, Inc |
|
12 / 133 page ![]() IA186EM/IA188EM Data Sheet 8/16-BIT Microcontrollers As of Production Version -03 MDRAM (0e0h) - The Memory Partition Register holds the A19-A13 address bits of the 20-bit base refresh address. The MDRAM register contains 0000h at reset. 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 M [6:0] 0 0 0 0 0 0 0 0 0 M [6:0] (bits 15-9) – Upper bits corresponding to address bits a19-a13 of the 20-Bit memory refresh address. These bits are not available on the a19-a0 bus. When using PSRAM mode, M6-M0 must be programmed to 0000000b. Reserved [8:0] (bits 8-0) – Reserved. These bits read back as 0. D1CON (0dah) - DMA CONtrol Registers. D0CON (0cah) DMA Control Registers control operation of the two DMA channels. The D0CON and D1CON registers are undefined at reset, except ST that is set to 0. 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 DM/IOn DDEC DINC SM/IOn SDEC SINC TC INT SYN1- SYN0 P TDRQ Res CHG ST Bn/W DM/IOn (bit 15) – Destination Address Space Select selects memory or I/O space for the destination address. When DM/IO is set to 1, the destination address is in memory space. When set to 0, the destination address is in I/O space. DDEC (bit 14) – Destination Decrement automatically decrements the destination address after each transfer when set to 1. The address is decremented by 1 or 2, depending on the byte/word bit (Bn/W, bit 0). The address does not change if the increment and decrement bits are set to the same value (00b or 11b). DINC (bit 13) – Destination Increment, when set to 1, automatically increments the destination address after each transfer. The address is incremented by 1 or 2, depending on the byte/word bit (Bn/W, bit 0). The address does not change if the increment and decrement bits are set to the same value (00b or 11b). SM/IOn (bit 12) – Source Address Space Select selects memory or I/O space for the source address. When SM/IOn is set to 1, the source address is in memory space, while when 0, the source address is in I/O space. 3737 Princeton NE, Ste 130 • Albuquerque, NM 87107 • Tel 505.883.5263 • Fax 505.883.5477 • www.Innovasic.com |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |