| 数据搜索系统,热门电子元器件搜索 |
|
TMS320F2811 数据表(PDF) 105 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
TMS320F2811 数据表(HTML) 105 Page - Texas Instruments |
|
105 / 173 page ![]() Electrical Specifications 105 April 2001 − Revised July 2007 SPRS174O tw(RSL1) th(XPLLDIS) th(XMP/MC) th(boot-mode)(C) VDDIO, V DD3VFL VDDAn (A),VDDAIO (3.3 V) XCLKIN 2.5 V 0.3 V X1 XRS XF/XPLLDIS XMP/MC Boot-Mode Pins VDD, VDD1 (1.8 V (or 1.9 V)) XCLKOUT I/O Pins User-Code Dependent User-Code Dependent User-Code Dependent Boot-ROM Execution Starts Peripheral/GPIO Function Based on Boot Code GPIO Pins as Input XPLLDIS Sampling GPIOF14 XCLKIN/8(B) GPIO Pins as Input (State Depends on Internal PU/PD) tOSCST (Don’t Care) (Don’t Care) User-Code Dependent Address/Data/ Control Address/Data Valid. Internal Boot-ROM Code Execution Phase User-Code Execution Phase NOTES: A. VDDAn − VDDA1/VDDA2 and AVDDREFBG B. Upon power up, SYSCLKOUT is XCLKIN/2 if the PLL is enabled. Since both the XTIMCLK and CLKMODE bits in the XINTCNF2 register come up with a reset state of 1, SYSCLKOUT is further divided by 4 before it appears at XCLKOUT. This explains why XCLKOUT = XCLKIN/8 during this phase. C. After reset, the Boot ROM code executes instructions for 1260 SYSCLKOUT cycles (SYSCLKOUT = XCLKIN/2) and then samples BOOT Mode pins. Based on the status of the Boot Mode pin, the boot code branches to destination memory or boot code function in ROM. The BOOT Mode pins should be held high/low for at least 2520 XCLKIN cycles from boot ROM execution time for proper selection of Boot modes. If Boot ROM code executes after power-on conditions (in debugger environment), the Boot code execution time is based on the current SYSCLKOUT speed. The SYSCLKOUT will be based on user environment and could be with or without PLL enabled. D. The state of the GPIO pins is undefined (i.e., they could be input or output) until the 1.8-V (or 1.9-V) supply reaches at least 1 V and 3.3-V supply reaches 2.5 V. td(EX) (D) tsu(XPLLDIS) Figure 6−11. Power-on Reset in Microcomputer Mode (XMP/MC = 0) (See Note D) |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |