LSM6DST datasheet(110/180 Pages) STMICROELECTRONICS

110 / 180 page

LSM6DST

110/180

DocID033525 Rev 2

9.62

UI_CTRL2_OIS (71h)

OIS configuration register. The primary interface can write this register when the

OIS_CTRL_FROM_UI bit in the FUNC_CFG_ACCESS (01h) register is equal to 1 (Primary

IF Full control mode); this register is read-only when the OIS_CTRL_FROM_UI bit is equal

to 0 (SPI2 Full control mode) and shows the content of the SPI2_CTRL2_OIS (71h) register.

Table 170. UI_CTRL2_OIS register description

Table 169. UI_CTRL2_OIS register

HPM1_

OIS

HPM0_

OIS

0(1)

1. This bit must be set to '0' for the correct operation of the device.

FTYPE_1_

OIS

FTYPE_0_

OIS

HP_EN_

OIS

HPM[1:0]_OIS

Selects gyroscope OIS chain digital high-pass filter cutoff. Default value: 00

(00: 16 mHz;

01: 65 mHz;

10: 260 mHz;

11: 1.04 Hz)

FTYPE_[1:0]_OIS

Selects gyroscope digital LPF1 filter bandwidth. Table 171 shows cutoff and

phase values obtained with all configurations.

HP_EN_OIS

Enables gyroscope OIS chain digital high-pass filter

Table 171. Gyroscope OIS chain digital LPF1 filter bandwidth selection

FTYPE_[1:0]_OIS

Cutoff [Hz]

Phase @ 20 Hz [°]

335.5

-6.69

232.0

-8.78

171.1

-11.18

609.0

-4.91

LSM6DST 数据表(PDF) 110 Page - STMicroelectronics

LSM6DST 数据表(HTML) 110 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载