TNETV2664FIBZWT datasheet(79/249 Pages) TI1

79 / 249 page

TMS320C6424

www.ti.com

SPRS347D – MARCH 2007 – REVISED DECEMBER 2009

•

Write a ‘1’ to the Boot Complete (BC) bit field in the BOOTCMPLT register to indicate that the host has

completed booting this device.

Once the bootloader code detects BC = 1, it directs the CPU to begin executing from the

DSPBOOTADDR register.

The BOOTCMPLT register is reset by any device-level global reset. For the list of device-level global

resets, see Section 6.5, Reset.

RESERVED

ERR

R/W-0000 0000 0000

R/W-0000

RESERVED

R/W- 0000 0000 0000 000

R/W-0

LEGEND: R = Read; W = Write; -n = value after reset

Figure 3-3. BOOTCMPLT Register— 0x01C4 000C

Table 3-8. BOOTCMPLT Register Description

Bit

Field Name

Description

31:20

RESERVED Reserved. For proper device operation, the user should only write "0" to these bits.

Boot Error

0000 = No Error (default).

19:16

ERR

0001 - 1111 = bootloader software detected a boot error and aborted the boot. For the error codes, see the

Using the TMS320C642x DSP Bootloader Application Report (literature number SPRAAK5).

15:1

RESERVED Reserved. For proper device operation, the user should only write "0" to these bits.

Boot Complete Flag from Host

This field is only applicable to Host Boots.

0 = Host has not completed booting this device (default).

1 = Host has completed booting this device. DSP can begin executing from the DSPBOOTADDR register

value.

3.4.2.3

DSPBOOTADDR Register

The DSP Boot Address (DSPBOOTADDR) register contains the starting address for the C64x+ CPU.

Whenever the C64x+ is released from reset, it begins executing from the location pointed to by

DSPBOOTADDR register. For Host boots (HPI Boot or PCI Boot), the DSPBOOTADDR register is also

used for communication between the Host and the bootloader code during boot.

The DSPBOOTADDR register is reset by any device-level global reset. For the list of device-level global

resets, see Section 6.5, Reset.

DSPBOOTADDR

R/W-0x0010 0000 or 0x4200 00000

LEGEND: R = Read; W = Write; -n = value after reset

Figure 3-4. DSPBOOTADDR Register— 0x01C4 0008

Device Configurations

Submit Documentation Feedback

Product Folder Link(s): TMS320C6424

TNETV2664FIBZWT 数据表(PDF) 79 Page - Texas Instruments

TNETV2664FIBZWT 数据表(HTML) 79 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载