LSM6DSV datasheet(54/187 Pages) STMICROELECTRONICS

部件名	LSM6DSV

功能描述	iNEMO inertial module: always-on 3-axis accelerometer and 3-axis gyroscope

PDF	187 Pages

Scroll/Zoom	100%

制造商	STMICROELECTRONICS [STMicroelectronics]

网页	http://www.st.com

标志

54 / 187 page

9.2

PIN_CTRL (02h)

SDO, OCS_Aux, SDO_Aux pins pull-up register (R/W). This register is not reset during the software reset

procedure (see bit 0 of the CTRL3 (12h) register).

Table 25. PIN_CTRL register

OIS_

PU_DIS

SDO_

PU_EN

IBHR_

POR_EN

0(1)

1(2)

1. This bit must be set to 0 for the correct operation of the device.

2. This bit must be set to 1 for the correct operation of the device.

Table 26. PIN_CTRL register description

OIS_PU_DIS

Disables pull-up on both OCS_Aux and SDO_Aux pins. Default value: 0

(0: OCS_Aux and SDO_Aux pins with pull-up;

1: OCS_Aux and SDO_Aux pins pull-up disconnected)

SDO_PU_EN

Enables pull-up on SDO pin. Default value: 0

(0: SDO pin pull-up disconnected; 1: SDO pin with pull-up)

IBHR_POR_EN

Selects the action the device performs after "reset whole chip" I3C pattern. Default value: 1

(0: configuration reset (SW reset + dynamic address reset);

(1: global reset (POR reset))

LSM6DSV

PIN_CTRL (02h)

DS13476 - Rev 2

page 54/187

LSM6DSV 数据表(PDF) 54 Page - STMicroelectronics