| 数据搜索系统,热门电子元器件搜索 |
|
ST10F296 数据表(PDF) 87 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST10F296 数据表(HTML) 87 Page - STMicroelectronics |
|
87 / 346 page ![]() Obsolete Product(s) - Obsolete Product(s) ST10F296E The bootstrap loader 87/346 6.6.4 ST10 configuration in alternate boot mode When the ST10F296E has entered BSL mode via CAN, the configuration shown in Table 42 is automatically set (values that deviate from the normal reset values, are marked in bold italic). Even if the internal IFlash is enabled, no code can be executed out of it. Warning: As the XFlash is needed, the XPERCON register is configured by the ABM loader code and the XPEN bit of the SYSCON register To do this: ● Copy a function into DPRAM that can do the following: – Disable the XPeripherals by clearing the XPEN bit in the SYSCON register – Enable the XPeripherals that are needed by writing the correct value in the XPERCON register – Set the XPEN bit in the SYSCON register – Return to the calling address ● Call the function from XFlash Changing the XPERCON value can not be executed from the XFlash because the XFlash is disabled when the XPEN bit in the SYSCON register is cleared. Note: The settings can be modified if the EINIT instruction is not executed (and is not in the bootstrap loader code). Table 42. ST10 configuration in alternate boot mode Watchdog timer Disabled Register SYSCON 0404H (1) 1. In bootstrap modes (standard or alternate) the ROMEN bit, bit 10 of the SYSCON register, is always set regardless of the EA pin level. The BYTDIS bit, bit 9 of the SYSCON register, is set according to the data bus width selection via Port 0 configuration. XPEN bit set Context pointer CP FA00H Register STKUN FA00H Stack pointer SP FA40H Register STKOV FC00H Register BUSCON0 Acc. to startup config.(2) 2. BUSCON0 is initialized with 0000h which disables the external bus if pin EA is high during reset. If pin EA is low during reset, the BUSACT0 bit, bit 10, and the ALECTL0 bit, bit 9, are set, enabling the external bus with a lengthened ALE signal. BTYP field, bit 7 and 6, is set according to Port 0 configuration. XPERCON 002DH XRAM1-2, XFlash, CAN1 enabled Obsolete Product(s) - Obsolete Product(s) |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |