 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
ST10F296 数据表(PDF) 45 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST10F296 数据表(HTML) 45 Page - STMicroelectronics |
|
|
45 / 346 page  Obsolete Product(s) - Obsolete Product(s) ST10F296E Internal Flash memory 45/346 Table 10 shows the composition of the control register interface. These registers can be addressed by the CPU . 5.1.3 Low power mode The Flash modules are automatically switched off when executing the PWRDN instruction. Consumption is drastically reduced, but, exiting this state can take a long time (tPD). Note: Recovery time from power-down mode for the Flash modules is shorter than the main oscillator start-up time. To avoid problems restarting to fetch code from the Flash, it is important to properly size the external circuit on the RPD pin. Power-off Flash mode is entered only at the end of the Flash write operation. 5.2 Write operation The Flash modules have a single register interface mapped in the memory space of the XFlash module (0x0E 0000 to 0x0E 0013). All operations are enabled through four 16-bit control registers: Flash control register 1-0 high/low (FCR1H/L-FCR0H/L). Eight other 16-bit registers are used to store Flash addresses and data for program operations (FARH/L and FDR1H/L-FDR0H/L) and write operation error flags (FERH/L). All registers are accessible with 8 and 16-bit instructions (since they are mapped on the ST10 XBus). Note: Before accessing the XFlash module (and consequently the Flash register to be used for program/erasing operations), the XFLASHEN bit in the XPERCON register and the XPEN bit in the SYSCON register must be set. The four Flash module banks have their own dedicated sense amplifiers, so that any bank can be read while any other bank is written. However simultaneous write operations (‘write’ meaning either program or erase) on different banks are forbidden. When a write operation is occurring in the Flash, no other write operations can be performed. Table 10. Control register interface Name Description Addresses Size (byte) ST10 bus size FCR1-0 Flash control registers 1-0 0x000E 0000 - 0x000E 0007 8 16-bit (XBus) FDR1-0 Flash data registers 1-0 0x000E 0008 - 0x000E 000F 8 FAR Flash address registers 0x000E 0010 - 0x000E 0013 4 FER Flash error register 0x000E 0014 - 0x000E 0015 2 FNVWPXR Flash non volatile protection X register 0x000E DFB0 - 0x000E DFB3 4 FNVWPIR Flash non volatile protection I register 0x000E DFB4 - 0x000E DFB7 4 FNVAPR0 Flash non volatile access protection register 0 0x000E DFB8 - 0x000E DFB9 2 FNVAPR1 Flash non volatile access protection register 1 0x000E DFBC - 0x000E DFBF 4 XFICR XFlash interface control register 0x000E E000 - 0x000E E001 2 Obsolete Product(s) - Obsolete Product(s) |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
