AM79C971VCW datasheet(171/265 Pages) AMD

171 / 265 page

Am79C971

171

P R E L I M INARY

The value of the SSIZE32 bit has

no effect on the drive of the upper

8 address bits. The upper 8 ad-

dress pins are always driven, re-

gardless of the state of the

SSIZE32 bit.

Note that the setting of the

SSIZE32 bit has no effect on the

defined width for I/O resources.

I/O resource width is determined

by the state of the DWIO bit

(BCR18, bit 7).

7-0

SWSTYLE

Software Style register. The val-

ue in this register determines the

style of register and memory re-

sources that shall be used by the

Am79C971 controller. The Soft-

ware Style selection will affect the

interpretation of a few bits within

the CSR space, the order of the

descriptor entries and the width of

the descriptors and initialization

block entries.

All Am79C971 controller CSR

bits and all descriptor, buffer, and

initialization block entries not cit-

ed in the Table 36 are unaffected

by the Software Style selection

and are, therefore, always fully

functional as specified in the CSR

and BCR sections.

Read/Write accessible only when

either the STOP or the SPND bit

is set. The SWSTYLE register will

contain the value 00h following

H_RESET and will be unaffected

by S_RESET or STOP.

BCR21: Interrupt Control

Bit

Name

Description

31-16 RES

Reserved locations. Written as

zeros and read as undefined.

15-0

INTCON

Reserved locations. Writes to this

operation of the Am79C971 con-

troller.

BCR22: PCI Latency Register

Note: Bits 15-0 in this register are programmable

through the EEPROM.

Bit

Name

Description

31-16 RES

Reserved locations. Written as

zeros and read as undefined.

15-8

MAX_LAT

Maximum Latency. Specifies the

maximum arbitration latency the

Am79C971 controller can sustain

without causing problems to the

network activity. The register val-

ue specifies the time in units of 1/

4 microseconds. MAX_LAT is

aliased to the PCI configuration

space register MAX_LAT (offset

3Fh). The host will use the value

in the register to determine the

setting of the Am79C971 Latency

Timer register.

Read accessible always; write

accessible only when either the

STOP or the SPND bit is set.

MAX_LAT is set to the value of

FFh by H_RESET which results

in a default maximum latency of

63.75 microseconds. It is recom-

Table 36.

Software Styles

SWSTYLE

[7:0]

Style

Name

SSIZE32

Initialization Block

Entries

Descriptor Ring Entries

00h

LANCE/

PCnet-ISA

controller

16-bit software

structures, non-burst or

burst access

16-bit software structures,

non-burst access only

01h

RES

02h

PCnet-PCI

controller

32-bit software

structures, non-burst or

burst access

32-bit software structures,

non-burst access only

03h

PCnet-PCI

controller

32-bit software

structures, non-burst or

burst access

32-bit software structures,

non-burst access only

All Other

Reserved

Undefined

AM79C971VCW 数据表(PDF) 171 Page - Advanced Micro Devices

AM79C971VCW 数据表(HTML) 171 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

AM79C971VCW 数据表(PDF) 171 Page - Advanced Micro Devices

AM79C971VCW 数据表(HTML) 171 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载